0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Heritage shopfronts
  4. Herefordshire

Heritage shopfronts in Herefordshire

A measured survey and scale drawings for premises in Herefordshire.

From Hereford to the furthest corner of Herefordshire, the sequence for heritage shopfronts stays the same: survey, drawings, written price, then work on site. We travel from Great Barr in Birmingham and use vetted teams working under S&K Glazing.

Most frontages share something with someone, be that a door to the flats above, a meter cupboard or a pilaster on the boundary. We pick those up early on heritage shopfronts in Herefordshire, because they are far easier to design around than to discover on the day.

Restored period shopfront with a painted timber fascia, console brackets and a tiled entrance lobby

What should you settle before committing to heritage shopfronts in Herefordshire?

A period front still has to work as a modern shop. For premises in Herefordshire, we look at how door gear, lighting, alarm contacts and a cleaner threshold can be added without any of it showing from the street.

Archive material can do half the design work. If an old photograph of your premises exists anywhere in Herefordshire, in a library, a family album or a past owner's files, it can settle questions about door position, blinds and lettering.

What consents apply to heritage shopfronts in Herefordshire?

A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for heritage shopfronts at premises in the Herefordshire area, an application is then likely. The council confirms which side of that line a job falls on.

How much do heritage shopfronts cost in Herefordshire?

A sensible starting budget is £8,495 to £24,995 plus VAT for a typical frontage. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.

Herefordshire at a glance
AreaHerefordshire
NationEngland
Towns covered3
Main townHereford
Planning regimeEngland: TCPA 1990 and the 2007 Advertisement Regulations
Building approvalBuilding Regulations (Approved Documents)
SurveyFree for new work, from our Great Barr base

Questions about heritage shopfronts in Herefordshire

How long does period joinery take for premises in Herefordshire?

Typically 8 to 14 weeks to make, then 1 to 3 weeks on site. Repairs in place can take less, depending on what the survey finds.

Can you match old glass at premises in Herefordshire?

Often. Reclaimed or drawn glass with a slight ripple can be sourced for small panes, and leaded lights can be repaired to the same pattern.

Can period features be saved during a refit in Hereford?

Yes, if they are recorded and protected early. We'd mark what stays on the drawing, then box in tiles, brackets or glass before any strip-out.

What rules apply to a fire exit door through a shopfront in the Herefordshire area?

It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.

Does a new shopfront in the Herefordshire area need Building Regulations approval?

Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.

Planning heritage shopfronts in Herefordshire?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price