We travel from Great Barr to survey and restore period shopfronts for Hollinwood premises, with drawings detailed enough for a specialist to read. One named contact stays with the job throughout.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Hollinwood, because what sits behind them can change the drawing.

Where should you begin with heritage shopfronts in Hollinwood?
Deep recessed lobbies are among the first things to go in a refit. If your Hollinwood premises still have one, especially with a tiled floor, we'd protect it, repair the floor and reuse the returns as display.
Period corner shops often had a canted entrance or a curved pane. If yours did, the floor and ceiling at your Hollinwood premises may still show its line, and we'd look for those marks before redesigning the corner.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Hollinwood premises, since a shutter box or old beam may set the limit.
What price should you expect for heritage shopfronts in Hollinwood?
We would budget £8,495 to £24,995 plus VAT for a typical frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
What sign-off might you need for heritage shopfronts in Hollinwood?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for heritage shopfronts at premises in the Hollinwood area: a planning application, or work that doesn't materially affect the external appearance.
For Hollinwood, the usual route for planning and advert applications is through Oldham Metropolitan Borough Council, and we confirm that when we visit.
| Town | Hollinwood |
|---|---|
| Area | Greater Manchester |
| Postcode districts | M35, OL7, OL8, OL9 |
| Planning authority | Oldham Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 68 miles |
| Survey | Free for new work |
Questions about heritage shopfronts in Hollinwood
Can you find the colour my Hollinwood shopfront used to be?
Often. Scraping back through the paint layers shows earlier colours, and a specialist can analyse them if the detail matters.
How long will restoration take at my Hollinwood premises?
New joinery typically takes 8 to 14 weeks to make, then 1 to 3 weeks on site. The survey gives you a realistic programme, because repair-only jobs can take far less.
Who makes the joinery for Hollinwood premises?
Specialist joiners vetted by us and working under S&K Glazing make and fit it. You deal with one named contact, and the contract is with S&K Glazing Limited.
What rules apply to a fire exit door through a shopfront in the Hollinwood area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do roller shutters need planning permission in the Hollinwood area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.