0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Heritage shopfronts
  4. Margate

Heritage shopfronts in Margate

Measured at your Margate premises, never guessed from a photograph.

A heritage shopfront in Margate starts with what survives on the building, however little that seems. We record it, draw it and design any new work from that evidence.

Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

Restored period shopfront with a painted timber fascia, console brackets and a tiled entrance lobby

What goes into getting heritage shopfronts right in Margate?

Period corner shops often had a canted entrance or a curved pane. If yours did, the floor and ceiling at your Margate premises may still show its line, and we'd look for those marks before redesigning the corner.

A narrow period front relies on fine detail. For a slim Margate unit we'd keep the bars thin and the mouldings small, because anything oversized on a small front looks like a later addition.

Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Margate premises, since a shutter box or old beam may set the limit.

How much could heritage shopfronts in Margate cost you?

We would budget £8,495 to £24,995 plus VAT for a typical frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.

Which applications might heritage shopfronts in Margate involve?

For heritage shopfronts at premises in the Margate area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.

Expect planning and advert applications here to go to Thanet District Council in the normal way. We check what that means for your building when we survey it in Margate.

Margate at a glance
TownMargate
AreaKent
Postcode districtsCT11, CT8, CT9
Planning authorityThanet District Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 162 miles
SurveyFree for new work

Questions about heritage shopfronts in Margate

How long will restoration take at my Margate premises?

New joinery typically takes 8 to 14 weeks to make, then 1 to 3 weeks on site. The survey gives you a realistic programme, because repair-only jobs can take far less.

Can you find the colour my Margate shopfront used to be?

Often. Scraping back through the paint layers shows earlier colours, and a specialist can analyse them if the detail matters.

What does a period survey of my Margate shop involve?

We measure the front, photograph every detail and check the condition of timber, paint and glass. With your agreement, we may lift a small piece of later boarding to see what survives behind it.

Do I need listed building consent for a shopfront in the Margate area?

Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.

Does a new shopfront in the Margate area need Building Regulations approval?

Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.

Planning heritage shopfronts in Margate?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price