Landlords, shopfitters and architects working in Welling can use the service as a full package or for one difficult detail. Either way the drawings start from a measured survey.
Nothing gets ordered off the back of a survey in Welling, because its job is to give us the numbers to draw and price from.

What makes shopfront design work well on Welling premises?
If the pavement falls along your frontage, we survey the levels before drawing a line. Door threshold, stallriser and sill are then set from the real ground, which is where designs drawn from photographs tend to fail.
Where the building above has strong vertical lines, we carry them down through pilasters and mullions. If it is plain, the shopfront can take a calmer, wider treatment.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Welling premises, since a shutter box or old beam may set the limit.
How much should you set aside for shopfront design in Welling?
The guide for shopfront design is £495 to £2,495 plus VAT per frontage. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
Could shopfront design in Welling need planning permission?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for shopfront work at premises in the Welling area: a planning application, or work that doesn't materially affect the external appearance.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to London Borough of Bexley.
| Town | Welling |
|---|---|
| Area | Greater London |
| Postcode districts | DA15, DA16, DA6, DA7 |
| Planning authority | London Borough of Bexley |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 114 miles |
| Survey | Free for new work |
Questions about shopfront design in Welling
Do I need a design service for a simple Welling shopfront?
Not always. Every job gets a measured survey and scale drawings anyway. The design service adds options, visuals and a full specification, which pay off when the look matters most.
Can you design a frontage for Welling premises I have not taken on yet?
Yes. A survey and concept drawing can show what the unit could become and what it might cost. That can be useful before you sign anything.
Will you work with my shopfitter or architect in Welling?
Yes. We share drawings and coordinate the frontage with their ceiling, lighting and display plans. Your named contact stays the route for questions on the frontage.
What rules apply to a fire exit door through a shopfront in the Welling area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need listed building consent for a shopfront in the Welling area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.