A well-made timber front should still look good in Armagh long after the first coat of paint has gone. That comes from choosing a durable timber, sealing the end grain and keeping water away from the bottom of every member.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

What goes into getting timber shopfronts right in Armagh?
If your Armagh premises have a deep recessed entrance, timber can make it feel like a welcome. We'd panel the returns, add a lit soffit and lay a hard-wearing threshold, keeping the end grain of every post clear of the wet.
A corner plot gives a timber front two faces and one chance to get the turn right. For Armagh premises on a corner, we'd use a pilaster or a canted bay at the angle, so the cornice wraps round without a clumsy mitre.
Where the footway outside your Armagh premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.
How much could timber shopfronts in Armagh cost you?
As a working budget, use £3,995 to £13,995 plus VAT for a typical frontage. Your place inside that range for timber shopfronts depends mostly on how much of the existing frontage can stay and how much has to be put right first.
Which applications might timber shopfronts in Armagh involve?
Section 23 of the Planning Act (Northern Ireland) 2011 sets the test: work that doesn't materially affect the external appearance isn't development. That makes appearance the deciding point for timber shopfronts at premises in the Armagh area, so planning permission is needed if it is materially affected and usually not for a true like-for-like replacement. The council confirms the position for the particular premises.
Planning and advert applications for Armagh premises normally go to Armagh City, Banbridge and Craigavon Borough Council. We check the position for your address at survey.
| Town | Armagh |
|---|---|
| Area | County Armagh |
| Postcode districts | BT61 |
| Planning authority | Armagh City, Banbridge and Craigavon Borough Council |
| Building approval | Building Control (Technical Booklets) |
| Survey | Free for new work |
Questions about timber shopfronts in Armagh
What should I budget for looking after a timber front in Armagh?
A repaint every 5 to 7 years, plus a yearly wash and touch-up of the cills. Door gear needs checking too, since seasonal movement can throw a door out of line.
Can you copy a timber shopfront I've seen in County Armagh?
We can work from your photo and borrow what makes it succeed, including proportions, moulding sizes and colour. The front is then drawn to your own Armagh opening.
Can you fit a timber front around existing tiles in Armagh?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
Does the Disability Discrimination Act apply to a shop entrance in the Armagh area?
Yes. The Disability Discrimination Act 1995 applies in Northern Ireland, and section 21 deals with physical features that make a service hard for disabled people to use. Regulations made in 2007 (SR 2007/473) add detail on features, third-party consent and design standards.
What building approval does a shopfront in the Armagh area need?
Usually a full plans application to Building Control in Northern Ireland, because building notices are for single dwellings. The Technical Booklets set the detail, with Booklet V for glass and Booklet R for access. Only dwelling windows and doors are exempt, so ask Building Control before assuming a like-for-like job falls outside the rules.