We make timber shopfronts for Aylestone premises, from plain painted frames to full cornice and console fronts. Every one starts with a measured survey and scale drawings.
A survey in Aylestone usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

What goes into getting timber shopfronts right in Aylestone?
Timber fits a night programme better than you'd think, since most of the joinery is made elsewhere. For a unit in Aylestone that can't close by day, we'd fit the frame in stages at night and leave painting until the end, once the dust has gone.
Narrow units suit timber well, because mouldings add interest where there's little width to work with. On a slim Aylestone frontage we'd keep one strong pane, a panelled door and a fascia that doesn't crowd them.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Aylestone premises on a slope look settled once that line is true.
Which applications might timber shopfronts in Aylestone involve?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Aylestone area, an application is then likely. The council confirms which side of that line a job falls on.
For Aylestone, the usual route for planning and advert applications is through Leicester City Council, and we confirm that when we visit.
How much could timber shopfronts in Aylestone cost you?
Allow £3,995 to £13,995 plus VAT for a typical frontage. Size and specification set most of that figure for timber shopfronts, and the rest depends on what the survey finds on site.
| Town | Aylestone |
|---|---|
| Area | Leicestershire |
| Postcode districts | LE1, LE18, LE2, LE3 |
| Planning authority | Leicester City Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 32 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Aylestone
What should I budget for looking after a timber front in Aylestone?
A repaint every 5 to 7 years, plus a yearly wash and touch-up of the cills. Door gear needs checking too, since seasonal movement can throw a door out of line.
Can a timber front take a modern sign in Aylestone?
Yes. Hand-painted letters suit a timber fascia well, and raised letters or a concealed trough light work too. We draw the sign and the joinery together, so the fixings don't cut through a moulding.
Will timber suffer on my Aylestone frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
Do I need planning permission to change a shopfront in the Aylestone area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.
Does a shop sign in the Aylestone area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.