Looking for a front with more character on your Caldicot premises? A painted timber frontage, built up in layers and proportioned to the building, has a warmth that reads from across the street.
Nothing gets ordered off the back of a survey in Caldicot, because its job is to give us the numbers to draw and price from.

How do you design around the building when planning timber shopfronts in Caldicot?
Narrow units suit timber well, because mouldings add interest where there's little width to work with. On a slim Caldicot frontage we'd keep one strong pane, a panelled door and a fascia that doesn't crowd them.
Timber fits a night programme better than you'd think, since most of the joinery is made elsewhere. For a unit in Caldicot that can't close by day, we'd fit the frame in stages at night and leave painting until the end, once the dust has gone.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Caldicot premises, since a shutter box or old beam may set the limit.
What might timber shopfronts cost in Caldicot?
Until the survey is done, plan on £3,995 to £13,995 plus VAT for a typical frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
What permissions should you check for timber shopfronts in Caldicot?
Section 55 of the Town and Country Planning Act 1990 sets the test in Wales: work that doesn't materially affect the external appearance isn't development. Anything that does needs planning permission, and that goes for timber shopfronts at premises in the Caldicot area as much as for a full new frontage. The council confirms how the test applies to your site.
Caldicot applications for planning permission or advertisement consent are normally handled by Monmouthshire County Council. Our survey includes a check of the position for your address.
| Town | Caldicot |
|---|---|
| Area | Gwent |
| Postcode districts | NP26 |
| Planning authority | Monmouthshire County Council |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 76 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Caldicot
Is timber a sensible choice for my Caldicot frontage?
Usually, if you're happy with a repaint every 5 to 7 years. A survey shows how exposed the front is and whether the structure behind it is sound, and we'll tell you if aluminium would serve you better.
Can you fit a timber front around existing tiles in Caldicot?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
Can a timber front take a modern sign in Caldicot?
Yes. Hand-painted letters suit a timber fascia well, and raised letters or a concealed trough light work too. We draw the sign and the joinery together, so the fixings don't cut through a moulding.
Can a shop fire exit in the Caldicot area use a sliding door?
No, a dedicated fire exit can't be a sliding or revolving door. In Wales, article 14(2) of the Regulatory Reform (Fire Safety) Order 2005 also says fire exit doors must open in the direction of escape and can't be locked against immediate use. The responsible person holds that duty, normally the employer or whoever controls the premises for a business, otherwise the owner.
Can a roller shutter go on a shop in the Caldicot area without planning permission?
Usually not in Wales. Part 42 of the 1995 Order, as inserted in 2014, excludes installing or replacing a security grill or shutter on a shopfront, so the rights for shops don't help. The only way to avoid an application is work that doesn't materially affect the appearance, and the council confirms that.