Timber gives a shopfront in Cirencester something metal can't: real depth, cast shadows and mouldings you can run your hand along. We draw each front to the measured opening and make it to those signed-off dimensions.
A survey in Cirencester usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

How would we approach timber shopfronts for your Cirencester premises?
Timber fits a night programme better than you'd think, since most of the joinery is made elsewhere. For a unit in Cirencester that can't close by day, we'd fit the frame in stages at night and leave painting until the end, once the dust has gone.
A corner plot gives a timber front two faces and one chance to get the turn right. For Cirencester premises on a corner, we'd use a pilaster or a canted bay at the angle, so the cornice wraps round without a clumsy mitre.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Cirencester premises, since a shutter box or old beam may set the limit.
What should you budget for timber shopfronts in Cirencester?
Allow £3,995 to £13,995 plus VAT for a typical frontage. Size and specification set most of that figure for timber shopfronts, and the rest depends on what the survey finds on site.
What consents could affect timber shopfronts in Cirencester?
For timber shopfronts at premises in the Cirencester area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
For Cirencester, the usual route for planning and advert applications is through Cotswold District Council, and we confirm that when we visit.
| Town | Cirencester |
|---|---|
| Area | Gloucestershire |
| Postcode districts | GL7 |
| Planning authority | Cotswold District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 57 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Cirencester
What should I budget for looking after a timber front in Cirencester?
A repaint every 5 to 7 years, plus a yearly wash and touch-up of the cills. Door gear needs checking too, since seasonal movement can throw a door out of line.
Can you fit a timber front around existing tiles in Cirencester?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
Will timber suffer on my Cirencester frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
Does the Equality Act apply to a shop entrance in the Cirencester area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.
Do roller shutters need planning permission in the Cirencester area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.