Timber gives a shopfront in Crawley something metal can't: real depth, cast shadows and mouldings you can run your hand along. We draw each front to the measured opening and make it to those signed-off dimensions.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

How would we approach timber shopfronts for your Crawley premises?
A corner plot gives a timber front two faces and one chance to get the turn right. For Crawley premises on a corner, we'd use a pilaster or a canted bay at the angle, so the cornice wraps round without a clumsy mitre.
Narrow units suit timber well, because mouldings add interest where there's little width to work with. On a slim Crawley frontage we'd keep one strong pane, a panelled door and a fascia that doesn't crowd them.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Crawley premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What consents could affect timber shopfronts in Crawley?
For timber shopfronts at premises in the Crawley area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
For Crawley, the usual route for planning and advert applications is through Crawley Borough Council, and we confirm that when we visit.
What should you budget for timber shopfronts in Crawley?
We would budget £3,995 to £13,995 plus VAT for a typical frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Crawley |
|---|---|
| Area | West Sussex |
| Postcode districts | RH10, RH11 |
| Planning authority | Crawley Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 124 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Crawley
Can a timber front take a modern sign in Crawley?
Yes. Hand-painted letters suit a timber fascia well, and raised letters or a concealed trough light work too. We draw the sign and the joinery together, so the fixings don't cut through a moulding.
How much disruption will a timber front cause in my Crawley shop?
Expect more time on site than an aluminium front, typically 3 to 7 days with the painting. Closed-day or out-of-hours fitting can be arranged, and the opening stays boarded and secure between stages.
Do you make the joinery for Crawley shops to order?
Yes. Every length is made to the signed-off drawings for your opening, then brought to Crawley from Great Barr by vetted teams working under S&K Glazing.
What rules apply to a fire exit door through a shopfront in the Crawley area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need planning permission to change a shopfront in the Crawley area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.