Colour and craft do the work on a timber front in Dorking. We test paint on your actual frontage, draw any moulding that matters at full size, and keep every dimension on paper for you to sign off.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

What goes into getting timber shopfronts right in Dorking?
A brand rollout can include timber, as long as the details repeat. For a branch in Dorking we'd use the same mouldings, colours and sign panel as your other sites, adjusting only the widths and heights to fit the opening.
A corner plot gives a timber front two faces and one chance to get the turn right. For Dorking premises on a corner, we'd use a pilaster or a canted bay at the angle, so the cornice wraps round without a clumsy mitre.
If your Dorking unit sits in a Victorian parade, the old pilasters usually set the rhythm, so a new front should land on them and not run past them. Keep that line and even a modern frame looks as though it belongs.
How much could timber shopfronts in Dorking cost you?
We would budget £3,995 to £13,995 plus VAT for a typical frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
Which applications might timber shopfronts in Dorking involve?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Dorking area, an application is then likely. The council confirms which side of that line a job falls on.
Expect planning and advert applications here to go to Mole Valley District Council in the normal way. We check what that means for your building when we survey it in Dorking.
| Town | Dorking |
|---|---|
| Area | Surrey |
| Postcode districts | KT23, RH4 |
| Planning authority | Mole Valley District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 113 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Dorking
Can a timber front take a modern sign in Dorking?
Yes. Hand-painted letters suit a timber fascia well, and raised letters or a concealed trough light work too. We draw the sign and the joinery together, so the fixings don't cut through a moulding.
What should I budget for looking after a timber front in Dorking?
A repaint every 5 to 7 years, plus a yearly wash and touch-up of the cills. Door gear needs checking too, since seasonal movement can throw a door out of line.
Do you make the joinery for Dorking shops to order?
Yes. Every length is made to the signed-off drawings for your opening, then brought to Dorking from Great Barr by vetted teams working under S&K Glazing.
Do I need listed building consent for a shopfront in the Dorking area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Do roller shutters need planning permission in the Dorking area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.