A well-made timber front should still look good in Hyde long after the first coat of paint has gone. That comes from choosing a durable timber, sealing the end grain and keeping water away from the bottom of every member.
Nothing gets ordered off the back of a survey in Hyde, because its job is to give us the numbers to draw and price from.

What goes into getting timber shopfronts right in Hyde?
If your Hyde premises have a deep recessed entrance, timber can make it feel like a welcome. We'd panel the returns, add a lit soffit and lay a hard-wearing threshold, keeping the end grain of every post clear of the wet.
A corner plot gives a timber front two faces and one chance to get the turn right. For Hyde premises on a corner, we'd use a pilaster or a canted bay at the angle, so the cornice wraps round without a clumsy mitre.
On a north-facing frontage the glass stays free of glare, but the interior can look dim from the street, so lighting needs to sit closer to the window. If your Hyde premises face south, the problem flips to reflections by day and fading stock.
Which applications might timber shopfronts in Hyde involve?
For timber shopfronts at premises in the Hyde area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to Tameside Metropolitan Borough Council.
How much could timber shopfronts in Hyde cost you?
Until the survey is done, plan on £3,995 to £13,995 plus VAT for a typical frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
| Town | Hyde |
|---|---|
| Area | Greater Manchester |
| Postcode districts | M34, SK14, SK15, SK16 |
| Planning authority | Tameside Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 63 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Hyde
How much disruption will a timber front cause in my Hyde shop?
Expect more time on site than an aluminium front, typically 3 to 7 days with the painting. Closed-day or out-of-hours fitting can be arranged, and the opening stays boarded and secure between stages.
What should I budget for looking after a timber front in Hyde?
A repaint every 5 to 7 years, plus a yearly wash and touch-up of the cills. Door gear needs checking too, since seasonal movement can throw a door out of line.
Can you fit a timber front around existing tiles in Hyde?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
Does a new shopfront in the Hyde area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
Does the Equality Act apply to a shop entrance in the Hyde area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.