We make timber shopfronts for Lofthouse premises, from plain painted frames to full cornice and console fronts. Every one starts with a measured survey and scale drawings.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

What goes into getting timber shopfronts right in Lofthouse?
Narrow units suit timber well, because mouldings add interest where there's little width to work with. On a slim Lofthouse frontage we'd keep one strong pane, a panelled door and a fascia that doesn't crowd them.
A south or west-facing Lofthouse frontage is hard on paint. We'd steer you toward a lighter colour or a more stable timber, and if the brand needs a dark finish, we'd plan a shorter repaint interval from the outset.
If your Lofthouse unit sits in a Victorian parade, the old pilasters usually set the rhythm, so a new front should land on them and not run past them. Keep that line and even a modern frame looks as though it belongs.
Which applications might timber shopfronts in Lofthouse involve?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Lofthouse area, an application is then likely. The council confirms which side of that line a job falls on.
For Lofthouse, the usual route for planning and advert applications is through Leeds City Council, and we confirm that when we visit.
How much could timber shopfronts in Lofthouse cost you?
Allow £3,995 to £13,995 plus VAT for a typical frontage. Size and specification set most of that figure for timber shopfronts, and the rest depends on what the survey finds on site.
| Town | Lofthouse |
|---|---|
| Area | West Yorkshire |
| Postcode districts | LS10, LS26, WF1, WF3 |
| Planning authority | Leeds City Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 83 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Lofthouse
Can you copy a timber shopfront I've seen in West Yorkshire?
We can work from your photo and borrow what makes it succeed, including proportions, moulding sizes and colour. The front is then drawn to your own Lofthouse opening.
Can you fit a timber front around existing tiles in Lofthouse?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
How much disruption will a timber front cause in my Lofthouse shop?
Expect more time on site than an aluminium front, typically 3 to 7 days with the painting. Closed-day or out-of-hours fitting can be arranged, and the opening stays boarded and secure between stages.
Do I need planning permission to change a shopfront in the Lofthouse area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.
What rules apply to a fire exit door through a shopfront in the Lofthouse area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.