Across Cornwall, timber is the material we suggest when a building has proportions worth respecting. For Saltash premises, we set the stallriser, pilasters and fascia from the elevation above, then detail the joinery to match.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Saltash, because what sits behind them can change the drawing.

What makes timber shopfronts work well on Saltash premises?
In a parade of mixed fronts in Saltash, painted timber can lift a unit without shouting. We'd take the height of the neighbouring cills and fascias, then let the depth of the mouldings and a considered colour do the talking.
A brand rollout can include timber, as long as the details repeat. For a branch in Saltash we'd use the same mouldings, colours and sign panel as your other sites, adjusting only the widths and heights to fit the opening.
Where units share one long run of fascia, breaking the height makes you stand out for the wrong reason. If that describes your Saltash parade, keep the line and win attention with lettering, lighting and what's in the window.
Could timber shopfronts in Saltash need planning permission?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for timber shopfronts at premises in the Saltash area: a planning application, or work that doesn't materially affect the external appearance.
Expect planning and advert applications here to go to Cornwall Council in the normal way. We check what that means for your building when we survey it in Saltash.
How much should you set aside for timber shopfronts in Saltash?
We would budget £3,995 to £13,995 plus VAT for a typical frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Saltash |
|---|---|
| Area | Cornwall |
| Postcode districts | PL12 |
| Planning authority | Cornwall Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 178 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Saltash
Is timber a sensible choice for my Saltash frontage?
Usually, if you're happy with a repaint every 5 to 7 years. A survey shows how exposed the front is and whether the structure behind it is sound, and we'll tell you if aluminium would serve you better.
Can you fit a timber front around existing tiles in Saltash?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
Will timber suffer on my Saltash frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
What rules apply to a fire exit door through a shopfront in the Saltash area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does a new shopfront in the Saltash area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.