Colour and craft do the work on a timber front in Sherborne. We test paint on your actual frontage, draw any moulding that matters at full size, and keep every dimension on paper for you to sign off.
It helps if you can be there when we visit Sherborne, since five minutes walking the frontage together answers more than a long email.

What should you think about before commissioning timber shopfronts in Sherborne?
If your Sherborne premises have a deep recessed entrance, timber can make it feel like a welcome. We'd panel the returns, add a lit soffit and lay a hard-wearing threshold, keeping the end grain of every post clear of the wet.
A brand rollout can include timber, as long as the details repeat. For a branch in Sherborne we'd use the same mouldings, colours and sign panel as your other sites, adjusting only the widths and heights to fit the opening.
If there are storeys above the shop, the frontage should feel like the base of the building and not a sign stuck on it. Lining up mullions with the windows overhead is a small move that settles the whole elevation at Sherborne premises.
Who approves timber shopfronts in Sherborne?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Sherborne area, an application is then likely. The council confirms which side of that line a job falls on.
Planning and advert applications for Sherborne premises normally go to Dorset Council. We check the position for your address at survey.
What is a realistic budget for timber shopfronts in Sherborne?
We would budget £3,995 to £13,995 plus VAT for a typical frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Sherborne |
|---|---|
| Area | Dorset |
| Postcode districts | DT9 |
| Planning authority | Dorset Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 114 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Sherborne
How much disruption will a timber front cause in my Sherborne shop?
Expect more time on site than an aluminium front, typically 3 to 7 days with the painting. Closed-day or out-of-hours fitting can be arranged, and the opening stays boarded and secure between stages.
What should I budget for looking after a timber front in Sherborne?
A repaint every 5 to 7 years, plus a yearly wash and touch-up of the cills. Door gear needs checking too, since seasonal movement can throw a door out of line.
Do you make the joinery for Sherborne shops to order?
Yes. Every length is made to the signed-off drawings for your opening, then brought to Sherborne from Great Barr by vetted teams working under S&K Glazing.
Do I need listed building consent for a shopfront in the Sherborne area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Do I need planning permission to change a shopfront in the Sherborne area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.