We make timber shopfronts for Westbury premises, from plain painted frames to full cornice and console fronts. Every one starts with a measured survey and scale drawings.
A survey in Westbury usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

What goes into getting timber shopfronts right in Westbury?
If your Westbury premises have a deep recessed entrance, timber can make it feel like a welcome. We'd panel the returns, add a lit soffit and lay a hard-wearing threshold, keeping the end grain of every post clear of the wet.
In a parade of mixed fronts in Westbury, painted timber can lift a unit without shouting. We'd take the height of the neighbouring cills and fascias, then let the depth of the mouldings and a considered colour do the talking.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Westbury premises, since a shutter box or old beam may set the limit.
Which applications might timber shopfronts in Westbury involve?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Westbury area, an application is then likely. The council confirms which side of that line a job falls on.
Planning and advert applications for Westbury premises normally go to Wiltshire Council. We check the position for your address at survey.
How much could timber shopfronts in Westbury cost you?
We would budget £3,995 to £13,995 plus VAT for a typical frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Westbury |
|---|---|
| Area | Wiltshire |
| Postcode districts | BA13 |
| Planning authority | Wiltshire Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 90 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Westbury
Can you copy a timber shopfront I've seen in Wiltshire?
We can work from your photo and borrow what makes it succeed, including proportions, moulding sizes and colour. The front is then drawn to your own Westbury opening.
How much disruption will a timber front cause in my Westbury shop?
Expect more time on site than an aluminium front, typically 3 to 7 days with the painting. Closed-day or out-of-hours fitting can be arranged, and the opening stays boarded and secure between stages.
Is timber a sensible choice for my Westbury frontage?
Usually, if you're happy with a repaint every 5 to 7 years. A survey shows how exposed the front is and whether the structure behind it is sound, and we'll tell you if aluminium would serve you better.
What rules apply to a fire exit door through a shopfront in the Westbury area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does a new shopfront in the Westbury area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.