Seen a frontage you admire? Bring the picture to our first talk about frameless glass shopfronts in Staffordshire, and we will work out what makes it succeed, from fascia depth to glass line, and what that means for your building.
Openings are rarely square or level, so the survey for frameless glass shopfronts records diagonals, pavement fall and head height at several points. Those few millimetres decide whether the finished front sits true against the building.

How do we handle frameless glass shopfronts for premises in Staffordshire?
A frameless front leaves your interior on show all day. For restaurants, salons and boutiques across Staffordshire, we look at the view from the pavement, including the backs of display units, till cables and ceiling services, and agree how to deal with them before the glass goes in.
Getting the panes to site is part of the design. For addresses in Stoke-on-Trent and across Staffordshire we check kerb height, parking, overhead cables and the route from the vehicle, since a 200kg sheet travels upright and can't turn a tight corner.
What consents apply to frameless glass shopfronts in Staffordshire?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for frameless glass shopfronts at premises in the Staffordshire area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
How much do frameless glass shopfronts cost in Staffordshire?
Until the survey is done, plan on £4,995 to £15,995 plus VAT for a typical frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
| Area | Staffordshire |
|---|---|
| Nation | England |
| Towns covered | 21 |
| Main town | Stoke-on-Trent |
| Planning regime | England: TCPA 1990 and the 2007 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents) |
| Survey | Free for new work, from our Great Barr base |
Questions about frameless glass shopfronts in Staffordshire
Is my building in Staffordshire strong enough for frameless glass?
Often, but it has to be checked on site. Older frontages may hang on a timber beam or a shallow steel, which might need strengthening before a full-height glass front goes beneath it.
Can you install frameless glass shopfronts across Staffordshire?
Yes. The survey, check measure and fitting are all arranged from Great Barr, and the panes come to site when the opening is ready.
Do you need to close the shop to fit frameless glass in Staffordshire?
Usually for part of the job. The old front has to come out before the new panes go in, so a closed day or an out-of-hours fit tends to be the tidiest answer.
Do I need listed building consent for a shopfront in the Staffordshire area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
What rules apply to a fire exit door through a shopfront in the Staffordshire area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.