We measure, draw and fit aluminium fronts for Atherstone premises under one contract. You deal with one named contact from the first survey to handover.
Measuring the opening is the easy part of a survey in Atherstone. We also look at the beam above, the pavement fall and any meters or drains nearby.

What goes into getting aluminium shopfronts right in Atherstone?
If your Atherstone frontage faces south or west, the colour choice has a physical effect. Dark frames run hot in full sun and long runs of aluminium move, so we'd leave room for expansion at the fascia and look at solar control glass to protect stock.
If your Atherstone branch is one stop in a wider rollout, we'd adapt your standard details to this opening instead of forcing the opening to fit them. Section, colour and fixings stay the same as the rest of the estate, while mullion spacing and fascia depth answer to the building.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Atherstone premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
Which applications might aluminium shopfronts in Atherstone involve?
For aluminium shopfronts at premises in the Atherstone area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Atherstone applications for planning permission or advertisement consent are normally handled by North Warwickshire Borough Council. Our survey includes a check of the position for your address.
How much could aluminium shopfronts in Atherstone cost you?
The guide for aluminium shopfronts is £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Town | Atherstone |
|---|---|
| Area | Warwickshire |
| Postcode districts | CV9 |
| Planning authority | North Warwickshire Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 16 miles |
| Survey | Free for new work |
Questions about aluminium shopfronts in Atherstone
Can a sign and shutter be fitted with the frame in Atherstone?
Yes, and it's usually the neater way to do it. One contract covers the frontage, so the shutter box, fascia and sign fixings are drawn together and nobody is left waiting for another trade.
Can you match a shopfront I like elsewhere in Warwickshire?
Usually, yes. Send the photo and address, and we'll work out the section, colour and proportions behind it, then adapt them to your Atherstone opening.
What do you need before surveying a unit in Atherstone?
An address, a few photos and a rough idea of what you have in mind are enough to book the survey. If you have a lease, a landlord's specification or brand guidelines, send those too, because they shape the drawing.
Does the Equality Act apply to a shop entrance in the Atherstone area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.
Do I need listed building consent for a shopfront in the Atherstone area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.