0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Aluminium shopfronts
  4. Bedworth

Aluminium shopfronts in Bedworth

Sightlines, proportion and finish worked out for your Bedworth building.

Colour is where an aluminium front in Bedworth earns its keep. We choose it against your actual brick, stone or render, then carry it through the frame, door, capping and fascia so the whole elevation reads as one.

It helps if you can be there when we visit Bedworth, since five minutes walking the frontage together answers more than a long email.

Dark bronze aluminium shopfront with slim frames, a low stallriser and a glazed entrance door

What should you think about before commissioning aluminium shopfronts in Bedworth?

If your Bedworth branch is one stop in a wider rollout, we'd adapt your standard details to this opening instead of forcing the opening to fit them. Section, colour and fixings stay the same as the rest of the estate, while mullion spacing and fascia depth answer to the building.

Some Bedworth landlords issue a shopfront specification, and we'd draw to it from the start. Where your brand needs something different, we mark each departure on the drawing so the landlord can approve the front without a round of guesswork.

If your Bedworth unit is narrow, a central door can split a small window into two weak ones. Moving the door to one side gives you a single confident pane, provided the layout inside still works.

Who approves aluminium shopfronts in Bedworth?

A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for aluminium shopfronts at premises in the Bedworth area, an application is then likely. The council confirms which side of that line a job falls on.

For Bedworth, the usual route for planning and advert applications is through Nuneaton and Bedworth Borough Council, and we confirm that when we visit.

What is a realistic budget for aluminium shopfronts in Bedworth?

We would budget £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.

Bedworth at a glance
TownBedworth
AreaWarwickshire
Postcode districtsCV12
Planning authorityNuneaton and Bedworth Borough Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 19 miles
SurveyFree for new work

Questions about aluminium shopfronts in Bedworth

What happens to my old shopfront in Bedworth?

We strip it out and take it away, and that work appears as its own line on the quotation. If part of the old front is worth keeping, such as a stallriser or decorative ironwork, say so at survey and we'll draw around it.

What do you need before surveying a unit in Bedworth?

An address, a few photos and a rough idea of what you have in mind are enough to book the survey. If you have a lease, a landlord's specification or brand guidelines, send those too, because they shape the drawing.

Who carries out the work in Bedworth?

Vetted teams working under S&K Glazing carry it out, with one named contact from survey to handover. The contract is with S&K Glazing Limited, and we travel to Bedworth from Great Barr.

What rules apply to a fire exit door through a shopfront in the Bedworth area?

It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.

Do I need planning permission to change a shopfront in the Bedworth area?

Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.

Planning aluminium shopfronts in Bedworth?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price