Thinking about opening up your Bedworth frontage? Start with where the stack will sit, because that one decision shapes the panel count, the track and the seating plan behind it.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

How do you design around the building when planning bi-folding shopfronts in Bedworth?
A corner plot offers something rare: a front that can open on two sides. For Bedworth corner premises, we'd look at two sets meeting with no fixed post, provided the structure above can span it.
On a narrow Bedworth unit, the stack can swallow the opening. We'd limit the set to three panels, or look at a single sliding leaf, so the opening you gain outweighs the width lost to parked frames.
On a north-facing frontage the glass stays free of glare, but the interior can look dim from the street, so lighting needs to sit closer to the window. If your Bedworth premises face south, the problem flips to reflections by day and fading stock.
What permissions should you check for bi-folding shopfronts in Bedworth?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for bi-folding shopfronts at premises in the Bedworth area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
For Bedworth, the usual route for planning and advert applications is through Nuneaton and Bedworth Borough Council, and we confirm that when we visit.
What might bi-folding shopfronts cost in Bedworth?
We would budget £5,195 to £13,995 plus VAT for a typical opening. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Bedworth |
|---|---|
| Area | Warwickshire |
| Postcode districts | CV12 |
| Planning authority | Nuneaton and Bedworth Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 19 miles |
| Survey | Free for new work |
Questions about bi-folding shopfronts in Bedworth
Will I lose a table to the stack in my Bedworth restaurant?
Possibly one, but careful layout usually avoids it. We draw the folded panels on your floor plan, then look at moving the stack to a quieter corner or splitting the set in two.
Can the threshold be level at my Bedworth premises?
It can be close to level, depending on the floor and drainage. We'd check the levels at survey, because a track sitting flush with the pavement still needs somewhere for water to go.
Can my Bedworth bi-fold be fitted around service?
Yes. Closed-day or out-of-hours fitting can be arranged to avoid your busiest sittings, and the job typically takes 2 to 4 days on site.
Does a shop sign in the Bedworth area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.
Do roller shutters need planning permission in the Bedworth area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.