0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Aluminium shopfronts
  4. Bangor

Aluminium shopfronts in Bangor, Gwynedd and Anglesey

Sightlines, proportion and finish worked out for your Bangor building.

Colour is where an aluminium front in Bangor earns its keep. We choose it against your actual brick, stone or render, then carry it through the frame, door, capping and fascia so the whole elevation reads as one.

Measuring the opening is the easy part of a survey in Bangor. We also look at the beam above, the pavement fall and any meters or drains nearby.

Dark bronze aluminium shopfront with slim frames, a low stallriser and a glazed entrance door

What goes into getting aluminium shopfronts right in Bangor?

Some Bangor landlords issue a shopfront specification, and we'd draw to it from the start. Where your brand needs something different, we mark each departure on the drawing so the landlord can approve the front without a round of guesswork.

If your Bangor branch is one stop in a wider rollout, we'd adapt your standard details to this opening instead of forcing the opening to fit them. Section, colour and fixings stay the same as the rest of the estate, while mullion spacing and fascia depth answer to the building.

Where the footway outside your Bangor premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.

How much could aluminium shopfronts in Bangor cost you?

Until the survey is done, plan on £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.

Which applications might aluminium shopfronts in Bangor involve?

Going by Part 42 of the 1995 Order as inserted in 2014, Wales has no permitted development route for changing a shopfront. The right covers A1 and A2 premises, but it excludes creating, altering or replacing a shopfront, or fitting or replacing a security grill or shutter on one, and it doesn't apply on Article 1(5) land. For aluminium shopfronts at premises in the Bangor area, that leaves a planning application, or work that leaves the appearance materially unchanged.

We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Bangor premises normally go to Cyngor Gwynedd.

Bangor at a glance
TownBangor
AreaGwynedd and Anglesey
Postcode districtsLL57, LL58, LL59
Planning authorityCyngor Gwynedd
Building approvalBuilding Regulations (Approved Documents for Wales)
Distance from Great BarrAbout 104 miles
SurveyFree for new work

Questions about aluminium shopfronts in Bangor

Will an aluminium front make my Bangor shop warmer?

It can, though the glass matters more than the frame. A thermally broken section with double-glazed units loses less heat than single glazing, and a well-sealed door is often the change you notice most on a cold day.

Can a sign and shutter be fitted with the frame in Bangor?

Yes, and it's usually the neater way to do it. One contract covers the frontage, so the shutter box, fascia and sign fixings are drawn together and nobody is left waiting for another trade.

How does pricing work for Bangor premises?

Every price comes from a measure-up, never a photograph. You get an itemised written quotation that holds for 90 days, and nothing is ordered until you accept it.

When does a shop sign in the Bangor area need advertisement consent?

A sign needs advertisement consent when it falls outside Class 5 or Class 4B of the 1992 Advertisement Regulations, which still apply in Wales. Within Class 5, an unlit sign sits on a wall containing a shop window and tops out at 4.6m or the first-floor sill if lower. A lit sign in a conservation area needs consent, because Class 4B isn't available there.

Can a shop fire exit in the Bangor area use a sliding door?

No, a dedicated fire exit can't be a sliding or revolving door. In Wales, article 14(2) of the Regulatory Reform (Fire Safety) Order 2005 also says fire exit doors must open in the direction of escape and can't be locked against immediate use. The responsible person holds that duty, normally the employer or whoever controls the premises for a business, otherwise the owner.

Planning aluminium shopfronts in Bangor?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price