For aluminium shopfronts across Gwynedd and Anglesey, we draw first and order later. You see a scale drawing with signed-off dimensions before anything is made, so the frontage on paper is the frontage you get.
Daylight is only half the brief for aluminium shopfronts, because a frontage keeps working after dark. Think about how the glass, the sign and the view inside will read to someone walking past at six o'clock on a winter evening.

Where do you start with aluminium shopfronts in Gwynedd and Anglesey?
Across Gwynedd and Anglesey, the same aluminium section can look sharp or wrong depending on what stands around it. We choose colour on site against the real brick, stone or render at your address, because a RAL chip under office lights tells you very little.
Landlords with several units in Gwynedd and Anglesey get the most from aluminium by fixing a house detail. One section, one colour and one stallriser height, agreed once, make every later unit simpler to draw and keep the parade consistent as tenants change.
What consents apply to aluminium shopfronts in Gwynedd and Anglesey?
Section 55 of the Town and Country Planning Act 1990 sets the test in Wales: work that doesn't materially affect the external appearance isn't development. Anything that does needs planning permission, and that goes for aluminium shopfronts at premises in the Gwynedd and Anglesey area as much as for a full new frontage. The council confirms how the test applies to your site.
How much do aluminium shopfronts cost in Gwynedd and Anglesey?
The guide for aluminium shopfronts is £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Area | Gwynedd and Anglesey |
|---|---|
| Nation | Wales |
| Towns covered | 3 |
| Main town | Bangor |
| Planning regime | Wales: TCPA 1990 and the 1992 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Survey | Free for new work, from our Great Barr base |
Questions about aluminium shopfronts in Gwynedd and Anglesey
Can premises in Bangor be fitted outside trading hours?
Usually, yes. Closed-day or out-of-hours installation can be arranged, and the noisy strip-out is planned first so the rest of the work disturbs neighbours less.
How long would an aluminium shopfront take in Gwynedd and Anglesey?
Typically 2 to 4 weeks to fabricate once drawings are signed off, then 1 to 5 days on site. The programme depends on the opening rather than the postcode, so it is set after the measured survey.
Does the distance to Gwynedd and Anglesey change the quote?
Any travel or access cost sits on its own line in the itemised quotation, so you can see it. Scaffolding, restricted delivery times and lifting gear tend to matter more than mileage.
Does a replacement shopfront in the Gwynedd and Anglesey area need Building Regulations approval?
Assume yes until building control says otherwise, because Wales has no like-for-like exemption. Glazing is judged against Approved Document N, as Wales keeps Part N. A registered installer can self-certify replacement windows and doors in non-dwellings, but not structural glass, curtain walling or revolving doors.
Can a shop fire exit in the Gwynedd and Anglesey area use a sliding door?
No, a dedicated fire exit can't be a sliding or revolving door. In Wales, article 14(2) of the Regulatory Reform (Fire Safety) Order 2005 also says fire exit doors must open in the direction of escape and can't be locked against immediate use. The responsible person holds that duty, normally the employer or whoever controls the premises for a business, otherwise the owner.