0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Aluminium shopfronts
  4. Bradford

Aluminium shopfronts in Bradford

Sightlines, proportion and finish worked out for your Bradford building.

Colour is where an aluminium front in Bradford earns its keep. We choose it against your actual brick, stone or render, then carry it through the frame, door, capping and fascia so the whole elevation reads as one.

A survey in Bradford usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

Dark bronze aluminium shopfront with slim frames, a low stallriser and a glazed entrance door

How would we approach aluminium shopfronts for your Bradford premises?

If your Bradford frontage faces south or west, the colour choice has a physical effect. Dark frames run hot in full sun and long runs of aluminium move, so we'd leave room for expansion at the fascia and look at solar control glass to protect stock.

On a corner plot, the side elevation does as much selling as the front. We'd run the stallriser and fascia round at one height and use a slim corner post in the frame colour, so anyone approaching your Bradford premises from either direction sees one continuous shopfront.

Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Bradford premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.

What consents could affect aluminium shopfronts in Bradford?

A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for aluminium shopfronts at premises in the Bradford area, an application is then likely. The council confirms which side of that line a job falls on.

Expect planning and advert applications here to go to City of Bradford Metropolitan District Council in the normal way. We check what that means for your building when we survey it in Bradford.

What should you budget for aluminium shopfronts in Bradford?

Allow £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Size and specification set most of that figure for aluminium shopfronts, and the rest depends on what the survey finds on site.

Bradford at a glance
TownBradford
AreaWest Yorkshire
Postcode districtsBD1, BD3, BD5, BD8
Planning authorityCity of Bradford Metropolitan District Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 86 miles
SurveyFree for new work

Does City of Bradford Metropolitan District Council publish shopfront guidance?

Yes, Bradford Shopfront Design Guide Supplementary Planning Document (2026). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • Stallrisers should ideally be no more than 20% of total shopfront height, and plastic is never acceptable for them.
  • Cornice, fascia and architrave together should be no more than 20% of total height, with lettering no more than two-thirds of the fascia height.
  • Solid and perforated roller shutters are strongly discouraged, and internal grilles, ideally set back at least 1m from the window, are the council's preferred approach.

Read our summary of the Bradford guidance

Questions about aluminium shopfronts in Bradford

Can I keep trading while my Bradford shopfront is replaced?

Often, yes. The front can usually be replaced a section at a time, with temporary screens keeping the shop secure, and a closed-day or out-of-hours fit can be arranged if that suits you better.

Who carries out the work in Bradford?

Vetted teams working under S&K Glazing carry it out, with one named contact from survey to handover. The contract is with S&K Glazing Limited, and we travel to Bradford from Great Barr.

What do you need before surveying a unit in Bradford?

An address, a few photos and a rough idea of what you have in mind are enough to book the survey. If you have a lease, a landlord's specification or brand guidelines, send those too, because they shape the drawing.

Does a new shopfront in the Bradford area need Building Regulations approval?

Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.

Do I need listed building consent for a shopfront in the Bradford area?

Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.

Planning aluminium shopfronts in Bradford?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price