Colour is where an aluminium front in Cookstown earns its keep. We choose it against your actual brick, stone or render, then carry it through the frame, door, capping and fascia so the whole elevation reads as one.
Measuring the opening is the easy part of a survey in Cookstown. We also look at the beam above, the pavement fall and any meters or drains nearby.

How would we approach aluminium shopfronts for your Cookstown premises?
A narrow Cookstown unit gains from fewer parts. Under about 4m wide, we'd offset the door and use one large pane rather than a central door with two slivers of glass either side, which makes the front feel wider than it measures.
Where Cookstown premises have a deep recessed entrance, it's usually worth keeping. The angled returns add display length and shelter, and a slim frame with soffit lighting turns a dark corner into the brightest part of the front in the evening.
Where the footway outside your Cookstown premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.
What consents could affect aluminium shopfronts in Cookstown?
A true like-for-like replacement usually needs no planning permission in Northern Ireland, since the external appearance isn't materially affected. Altered materials, proportions or sightlines usually do count, so for aluminium shopfronts at premises in the Cookstown area, planning permission is then likely to be needed. The council confirms where a job sits.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Cookstown premises normally go to Mid Ulster District Council.
What should you budget for aluminium shopfronts in Cookstown?
The guide for aluminium shopfronts is £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Town | Cookstown |
|---|---|
| Area | County Tyrone |
| Postcode districts | BT80 |
| Planning authority | Mid Ulster District Council |
| Building approval | Building Control (Technical Booklets) |
| Survey | Free for new work |
Questions about aluminium shopfronts in Cookstown
Can a sign and shutter be fitted with the frame in Cookstown?
Yes, and it's usually the neater way to do it. One contract covers the frontage, so the shutter box, fascia and sign fixings are drawn together and nobody is left waiting for another trade.
Can you match a shopfront I like elsewhere in County Tyrone?
Usually, yes. Send the photo and address, and we'll work out the section, colour and proportions behind it, then adapt them to your Cookstown opening.
Will an aluminium front make my Cookstown shop warmer?
It can, though the glass matters more than the frame. A thermally broken section with double-glazed units loses less heat than single glazing, and a well-sealed door is often the change you notice most on a cold day.
What building approval does a shopfront in the Cookstown area need?
Usually a full plans application to Building Control in Northern Ireland, because building notices are for single dwellings. The Technical Booklets set the detail, with Booklet V for glass and Booklet R for access. Only dwelling windows and doors are exempt, so ask Building Control before assuming a like-for-like job falls outside the rules.
Does the Disability Discrimination Act apply to a shop entrance in the Cookstown area?
Yes. The Disability Discrimination Act 1995 applies in Northern Ireland, and section 21 deals with physical features that make a service hard for disabled people to use. Regulations made in 2007 (SR 2007/473) add detail on features, third-party consent and design standards.