From Omagh to the furthest corner of County Tyrone, the sequence for aluminium shopfronts stays the same: survey, drawings, written price, then work on site. We travel from Great Barr in Birmingham and use vetted teams working under S&K Glazing.
Finishes behave differently at full size. Any sample we show you for aluminium shopfronts is better judged at the premises in daylight, since a colour that looks quiet on a desk can read much louder across a whole elevation.

How should you approach aluminium shopfronts in County Tyrone?
Landlords with several units in County Tyrone get the most from aluminium by fixing a house detail. One section, one colour and one stallriser height, agreed once, make every later unit simpler to draw and keep the parade consistent as tenants change.
If your premises in County Tyrone face the sea or a main road, the finish plan changes before the colour does. Salt and traffic film are harder on a coating, so we'd look at pre-treatment, fixings and a realistic cleaning routine from the first drawing.
What consents apply to aluminium shopfronts in County Tyrone?
A true like-for-like replacement usually needs no planning permission in Northern Ireland, since the external appearance isn't materially affected. Altered materials, proportions or sightlines usually do count, so for aluminium shopfronts at premises in the County Tyrone area, planning permission is then likely to be needed. The council confirms where a job sits.
How much do aluminium shopfronts cost in County Tyrone?
A sensible starting budget is £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
| Area | County Tyrone |
|---|---|
| Nation | Northern Ireland |
| Towns covered | 4 |
| Main town | Omagh |
| Planning regime | Northern Ireland: Planning Act 2011 and the 2015 Advertisement Regulations |
| Building approval | Building Control (Technical Booklets) |
| Survey | Free for new work, from our Great Barr base |
Does Fermanagh and Omagh District Council publish shopfront guidance?
Yes, Shop Front Design, Supplementary Planning Guidance. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Stallrisers should not exceed the pilaster base or fascia depth, whichever is less, with depths up to 600mm generally acceptable.
- Fascia depths up to 600mm are generally acceptable, one fascia should not span two buildings, and box fascia signs should be avoided.
- External solid roller shutters are not acceptable, with security glass, internal lattice shutters or demountable mesh grilles preferred.
Questions about aluminium shopfronts in County Tyrone
How long would an aluminium shopfront take in County Tyrone?
Typically 2 to 4 weeks to fabricate once drawings are signed off, then 1 to 5 days on site. The programme depends on the opening rather than the postcode, so it is set after the measured survey.
Can premises in Omagh be fitted outside trading hours?
Usually, yes. Closed-day or out-of-hours installation can be arranged, and the noisy strip-out is planned first so the rest of the work disturbs neighbours less.
Does the distance to County Tyrone change the quote?
Any travel or access cost sits on its own line in the itemised quotation, so you can see it. Scaffolding, restricted delivery times and lifting gear tend to matter more than mileage.
What building approval does a shopfront in the County Tyrone area need?
Usually a full plans application to Building Control in Northern Ireland, because building notices are for single dwellings. The Technical Booklets set the detail, with Booklet V for glass and Booklet R for access. Only dwelling windows and doors are exempt, so ask Building Control before assuming a like-for-like job falls outside the rules.
What rules apply to a fire exit door through a shopfront in the County Tyrone area?
It must open in the direction of escape, it can't be locked against immediate use, and a dedicated fire exit can't be sliding or revolving. In Northern Ireland that comes from regulation 13(2) of the Fire Safety Regulations (Northern Ireland) 2010, and duties sit with dutyholders, meaning the employer and any person with control of the premises, whom the Fire and Rescue Service calls the appropriate person. An outward door may also need Department consent under Article 56 of the Roads (Northern Ireland) Order 1993.