Every enquiry for revolving doors in County Tyrone begins with a measured survey at the premises, because a price taken from a photograph is only a guess. That visit gives you real dimensions before anyone draws a line or orders a thing.
Access gets as much attention as appearance at survey. Where a vehicle can stop, how long sections reach the opening and how the pavement stays safe for the public all shape the programme for revolving doors in County Tyrone.

How should you approach revolving doors in County Tyrone?
A glass drum is one of the few things on a frontage you can light from inside. For premises in County Tyrone that trade into the evening, we'd plan the canopy lighting early, because the drum then works as a lantern at the entrance.
A side door is part of the design. Across County Tyrone, we treat the door beside the drum as an equal, with matching finishes and the same clear approach, so nobody feels sent round the back.
What consents apply to revolving doors in County Tyrone?
Section 23 of the Planning Act (Northern Ireland) 2011 sets the test: work that doesn't materially affect the external appearance isn't development. That makes appearance the deciding point for revolving doors at premises in the County Tyrone area, so planning permission is needed if it is materially affected and usually not for a true like-for-like replacement. The council confirms the position for the particular premises.
How much do revolving doors cost in County Tyrone?
Allow £19,995 to £59,995 plus VAT per door. Size and specification set most of that figure for revolving doors, and the rest depends on what the survey finds on site.
| Area | County Tyrone |
|---|---|
| Nation | Northern Ireland |
| Towns covered | 4 |
| Main town | Omagh |
| Planning regime | Northern Ireland: Planning Act 2011 and the 2015 Advertisement Regulations |
| Building approval | Building Control (Technical Booklets) |
| Survey | Free for new work, from our Great Barr base |
Does Fermanagh and Omagh District Council publish shopfront guidance?
Yes, Shop Front Design, Supplementary Planning Guidance. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Stallrisers should not exceed the pilaster base or fascia depth, whichever is less, with depths up to 600mm generally acceptable.
- Fascia depths up to 600mm are generally acceptable, one fascia should not span two buildings, and box fascia signs should be avoided.
- External solid roller shutters are not acceptable, with security glass, internal lattice shutters or demountable mesh grilles preferred.
Questions about revolving doors in County Tyrone
Can you replace an old revolving door in Omagh?
Often, yes. We'd measure the existing drum and floor, then advise on refurbishing or replacing it, and a like-sized drum keeps the building work down.
How much notice does a revolving door need for a site in County Tyrone?
Allow 10 to 16 weeks after sign-off as a typical range, plus about a week on site. Starting early also gives the floor work time to finish.
Is my entrance in Omagh big enough for a revolving door?
It may be, if the frontage or lobby is generous. A 2.1m drum takes around 2.4m each way, and you'll need room for a side door as well.
Does a shop sign in the County Tyrone area need advertisement consent?
Not always. Under Northern Ireland's 2015 Regulations, an unlit sign within Class 5 generally needs no application, with a 5m top height and 0.3m letters, and neither does a lit sign within Class 4(2). That lit class isn't available in conservation areas, Areas of Outstanding Natural Beauty or National Parks, so ask first.
Do I need planning permission to change a shopfront in the County Tyrone area?
Usually yes, when the work materially affects the external appearance. Northern Ireland's 2015 Order appears to offer no permitted development route for a shopfront. The council confirms the position, and a true like-for-like replacement usually needs no application.