Every enquiry for curtain walling in County Tyrone begins with a measured survey at the premises, because a price taken from a photograph is only a guess. That visit gives you real dimensions before anyone draws a line or orders a thing.
Finishes behave differently at full size. Any sample we show you for curtain walling is better judged at the premises in daylight, since a colour that looks quiet on a desk can read much louder across a whole elevation.

What should you settle before committing to curtain walling in County Tyrone?
Exposure changes from plot to plot across County Tyrone. A corner unit or a frontage facing open ground takes more wind than one sheltered in a terrace, so we size mullions for your elevation and leave the catalogue table aside.
Occupied upper floors change the sequence. Many elevations in County Tyrone can come out one bay at a time, with temporary weathering each evening so the rooms behind stay dry.
What consents apply to curtain walling in County Tyrone?
Section 23 of the Planning Act (Northern Ireland) 2011 sets the test: work that doesn't materially affect the external appearance isn't development. That makes appearance the deciding point for curtain walling at premises in the County Tyrone area, so planning permission is needed if it is materially affected and usually not for a true like-for-like replacement. The council confirms the position for the particular premises.
How much does curtain walling cost in County Tyrone?
Allow £550 to £1,250 plus VAT per m². Size and specification set most of that figure for curtain walling, and the rest depends on what the survey finds on site.
| Area | County Tyrone |
|---|---|
| Nation | Northern Ireland |
| Towns covered | 4 |
| Main town | Omagh |
| Planning regime | Northern Ireland: Planning Act 2011 and the 2015 Advertisement Regulations |
| Building approval | Building Control (Technical Booklets) |
| Survey | Free for new work, from our Great Barr base |
Does Fermanagh and Omagh District Council publish shopfront guidance?
Yes, Shop Front Design, Supplementary Planning Guidance. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Stallrisers should not exceed the pilaster base or fascia depth, whichever is less, with depths up to 600mm generally acceptable.
- Fascia depths up to 600mm are generally acceptable, one fascia should not span two buildings, and box fascia signs should be avoided.
- External solid roller shutters are not acceptable, with security glass, internal lattice shutters or demountable mesh grilles preferred.
Questions about curtain walling in County Tyrone
Can a building around Omagh stay open during the work?
Usually, with some care over the sequence. Bays can be phased so one entrance stays in use, and closed-day or out-of-hours installation can be arranged for the parts that affect it. Your named contact agrees the sequence with you before work starts.
Does a job further from Omagh cost more?
Distance is a small part of the price. The elevation, the glass and the access make up most of it, and any travel cost appears as its own line on the itemised quotation.
Can one contract cover the curtain wall and shopfront on premises in County Tyrone?
Yes. Frame, glass, doors and signs can all sit in one contract with S&K Glazing, so the junction between upper and lower elevations has a single owner. That junction is where separate trades most often leave a gap.
What building approval does a shopfront in the County Tyrone area need?
Usually a full plans application to Building Control in Northern Ireland, because building notices are for single dwellings. The Technical Booklets set the detail, with Booklet V for glass and Booklet R for access. Only dwelling windows and doors are exempt, so ask Building Control before assuming a like-for-like job falls outside the rules.
Does a shop sign in the County Tyrone area need advertisement consent?
Not always. Under Northern Ireland's 2015 Regulations, an unlit sign within Class 5 generally needs no application, with a 5m top height and 0.3m letters, and neither does a lit sign within Class 4(2). That lit class isn't available in conservation areas, Areas of Outstanding Natural Beauty or National Parks, so ask first.