From Omagh to the furthest corner of County Tyrone, the sequence for bronze and metal shopfronts stays the same: survey, drawings, written price, then work on site. We travel from Great Barr in Birmingham and use vetted teams working under S&K Glazing.
Your frontage is read alongside its neighbours, so we note the fascia line, stallriser height and pilasters on either side before drawing bronze and metal shopfronts for County Tyrone premises. Matching those lines or breaking them on purpose can both work, whereas doing it by accident never does.

What should you settle before committing to bronze and metal shopfronts in County Tyrone?
Salt air changes the specification. If your premises in County Tyrone sit near the coast, we'd look at grade 316 stainless fixings, tighter isolation between metals and a shorter care cycle for any live finish.
Two metals can share one front if the plan is clear. For premises in County Tyrone we'd often pair a dark bronze frame with brass handles or lettering, keeping each metal to its own job so the eye reads one idea.
What consents apply to bronze and metal shopfronts in County Tyrone?
A true like-for-like replacement usually needs no planning permission in Northern Ireland, since the external appearance isn't materially affected. Altered materials, proportions or sightlines usually do count, so for bronze and metal shopfronts at premises in the County Tyrone area, planning permission is then likely to be needed. The council confirms where a job sits.
How much do bronze and metal shopfronts cost in County Tyrone?
A sensible starting budget is £7,995 to £24,995 plus VAT for a typical frontage. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
| Area | County Tyrone |
|---|---|
| Nation | Northern Ireland |
| Towns covered | 4 |
| Main town | Omagh |
| Planning regime | Northern Ireland: Planning Act 2011 and the 2015 Advertisement Regulations |
| Building approval | Building Control (Technical Booklets) |
| Survey | Free for new work, from our Great Barr base |
Does Fermanagh and Omagh District Council publish shopfront guidance?
Yes, Shop Front Design, Supplementary Planning Guidance. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Stallrisers should not exceed the pilaster base or fascia depth, whichever is less, with depths up to 600mm generally acceptable.
- Fascia depths up to 600mm are generally acceptable, one fascia should not span two buildings, and box fascia signs should be avoided.
- External solid roller shutters are not acceptable, with security glass, internal lattice shutters or demountable mesh grilles preferred.
Questions about bronze and metal shopfronts in County Tyrone
Who cleans a bronze shopfront in County Tyrone?
Your window cleaner can look after the glass, while the metal needs someone briefed on the finish. A short care note and a yearly check keep the two from getting mixed up.
How long does a metal front take for sites in County Tyrone?
Making typically takes 8 to 14 weeks from approval, and fitting 3 to 7 days. Finish approval tends to be the stage that sets the pace.
Will a bronze front suit premises in Omagh?
It can, provided the colour works with the building and the light on your side of the street. We'd show samples on site instead of deciding from a photograph.
Do roller shutters need planning permission in the County Tyrone area?
Usually yes, when they materially affect the external appearance. No permitted development route for shutters appears in Northern Ireland's 2015 Order, so treat them as falling to the appearance test. Check with the council before ordering.
Does the Disability Discrimination Act apply to a shop entrance in the County Tyrone area?
Yes. The Disability Discrimination Act 1995 applies in Northern Ireland, and section 21 deals with physical features that make a service hard for disabled people to use. Regulations made in 2007 (SR 2007/473) add detail on features, third-party consent and design standards.