Aluminium shopfronts for Croydon premises start with a measured survey of your opening, because the neat lines of the metal will expose any lean in the building. We draw the frame to scale and you sign off every dimension before anything is made.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Croydon, because what sits behind them can change the drawing.

What should you think about before commissioning aluminium shopfronts in Croydon?
A narrow Croydon unit gains from fewer parts. Under about 4m wide, we'd offset the door and use one large pane rather than a central door with two slivers of glass either side, which makes the front feel wider than it measures.
If your unit sits in a parade in Croydon, we'd start with the neighbours: the fascia line, cill height and pier rhythm of the row. Holding those lines lets a slimmer section stand out for the right reasons, rather than fighting everything beside it.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Croydon premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What is a realistic budget for aluminium shopfronts in Croydon?
We would budget £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
Who approves aluminium shopfronts in Croydon?
For aluminium shopfronts at premises in the Croydon area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
For Croydon, the usual route for planning and advert applications is through London Borough of Croydon, and we confirm that when we visit.
| Town | Croydon |
|---|---|
| Area | Greater London |
| Postcode districts | CR0, CR7, CR9, SE25 |
| Planning authority | London Borough of Croydon |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 112 miles |
| Survey | Free for new work |
Questions about aluminium shopfronts in Croydon
Will an aluminium front make my Croydon shop warmer?
It can, though the glass matters more than the frame. A thermally broken section with double-glazed units loses less heat than single glazing, and a well-sealed door is often the change you notice most on a cold day.
Who carries out the work in Croydon?
Vetted teams working under S&K Glazing carry it out, with one named contact from survey to handover. The contract is with S&K Glazing Limited, and we travel to Croydon from Great Barr.
What do you need before surveying a unit in Croydon?
An address, a few photos and a rough idea of what you have in mind are enough to book the survey. If you have a lease, a landlord's specification or brand guidelines, send those too, because they shape the drawing.
What rules apply to a fire exit door through a shopfront in the Croydon area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need planning permission to change a shopfront in the Croydon area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.