A good aluminium shopfront in Dagenham should look as if it grew out of the building above it. We set the stallriser, mullions and fascia from the proportions of your elevation, across Dagenham and the rest of Greater London.
It helps if you can be there when we visit Dagenham, since five minutes walking the frontage together answers more than a long email.

How would we approach aluminium shopfronts for your Dagenham premises?
If your Dagenham frontage faces south or west, the colour choice has a physical effect. Dark frames run hot in full sun and long runs of aluminium move, so we'd leave room for expansion at the fascia and look at solar control glass to protect stock.
A narrow Dagenham unit gains from fewer parts. Under about 4m wide, we'd offset the door and use one large pane rather than a central door with two slivers of glass either side, which makes the front feel wider than it measures.
Where units share one long run of fascia, breaking the height makes you stand out for the wrong reason. If that describes your Dagenham parade, keep the line and win attention with lettering, lighting and what's in the window.
What consents could affect aluminium shopfronts in Dagenham?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for aluminium shopfronts at premises in the Dagenham area, an application is then likely. The council confirms which side of that line a job falls on.
Planning and advert applications for Dagenham premises normally go to London Borough of Barking and Dagenham. We check the position for your address at survey.
What should you budget for aluminium shopfronts in Dagenham?
As a working budget, use £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Your place inside that range for aluminium shopfronts depends mostly on how much of the existing frontage can stay and how much has to be put right first.
| Town | Dagenham |
|---|---|
| Area | Greater London |
| Postcode districts | RM10, RM7, RM8, RM9 |
| Planning authority | London Borough of Barking and Dagenham |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 112 miles |
| Survey | Free for new work |
Questions about aluminium shopfronts in Dagenham
Can a sign and shutter be fitted with the frame in Dagenham?
Yes, and it's usually the neater way to do it. One contract covers the frontage, so the shutter box, fascia and sign fixings are drawn together and nobody is left waiting for another trade.
What do you need before surveying a unit in Dagenham?
An address, a few photos and a rough idea of what you have in mind are enough to book the survey. If you have a lease, a landlord's specification or brand guidelines, send those too, because they shape the drawing.
Will an aluminium front make my Dagenham shop warmer?
It can, though the glass matters more than the frame. A thermally broken section with double-glazed units loses less heat than single glazing, and a well-sealed door is often the change you notice most on a cold day.
Does a new shopfront in the Dagenham area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
Do roller shutters need planning permission in the Dagenham area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.