A good aluminium shopfront in Hythe should look as if it grew out of the building above it. We set the stallriser, mullions and fascia from the proportions of your elevation, across Hythe and the rest of Kent.
Bring whatever you have to the survey in Hythe: brand guidelines, lease plans, old drawings or a photo of a frontage you admire.

What goes into getting aluminium shopfronts right in Hythe?
Some Hythe landlords issue a shopfront specification, and we'd draw to it from the start. Where your brand needs something different, we mark each departure on the drawing so the landlord can approve the front without a round of guesswork.
A narrow Hythe unit gains from fewer parts. Under about 4m wide, we'd offset the door and use one large pane rather than a central door with two slivers of glass either side, which makes the front feel wider than it measures.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Hythe premises, since a shutter box or old beam may set the limit.
Which applications might aluminium shopfronts in Hythe involve?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for aluminium shopfronts at premises in the Hythe area, an application is then likely. The council confirms which side of that line a job falls on.
Hythe applications for planning permission or advertisement consent are normally handled by Folkestone and Hythe District Council. Our survey includes a check of the position for your address.
How much could aluminium shopfronts in Hythe cost you?
Our guide band is £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Scope is the biggest lever, so a tighter brief for aluminium shopfronts brings the figure down faster than any change of detail.
| Town | Hythe |
|---|---|
| Area | Kent |
| Postcode districts | CT21 |
| Planning authority | Folkestone and Hythe District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 164 miles |
| Survey | Free for new work |
Questions about aluminium shopfronts in Hythe
What happens to my old shopfront in Hythe?
We strip it out and take it away, and that work appears as its own line on the quotation. If part of the old front is worth keeping, such as a stallriser or decorative ironwork, say so at survey and we'll draw around it.
How does pricing work for Hythe premises?
Every price comes from a measure-up, never a photograph. You get an itemised written quotation that holds for 90 days, and nothing is ordered until you accept it.
Can I keep trading while my Hythe shopfront is replaced?
Often, yes. The front can usually be replaced a section at a time, with temporary screens keeping the shop secure, and a closed-day or out-of-hours fit can be arranged if that suits you better.
Does a new shopfront in the Hythe area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
Does the Equality Act apply to a shop entrance in the Hythe area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.