0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Curtain walling
  4. Hythe

Curtain walling in Hythe, Kent

A frontage for Hythe premises, drawn first and ordered later.

Replacing tired glazing on Hythe premises is often a chance to rethink the whole elevation. We survey the existing frame and fixings, then advise whether a new curtain wall or a more modest reglaze makes sense.

Please have keys to any meter cupboards and shutter housings to hand when we survey in Hythe, because what sits behind them can change the drawing.

Aluminium curtain walling with slim mullions across a two-storey commercial facade at dusk

What goes into getting curtain walling right in Hythe?

If the ground floor of your Hythe premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.

If your Hythe premises have a concrete frame, we open up a sample of slab edges at survey and plan brackets around what is really there. Steel frames and older masonry piers each need a different fixing, so nothing is priced from assumptions.

Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Hythe premises, since a shutter box or old beam may set the limit.

How much could curtain walling in Hythe cost you?

We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.

Which applications might curtain walling in Hythe involve?

For curtain walling at premises in the Hythe area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.

Expect planning and advert applications here to go to Folkestone and Hythe District Council in the normal way. We check what that means for your building when we survey it in Hythe.

Hythe at a glance
TownHythe
AreaKent
Postcode districtsCT21
Planning authorityFolkestone and Hythe District Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 164 miles
SurveyFree for new work

Questions about curtain walling in Hythe

Can part of an elevation in Hythe be done first?

Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.

Who do I deal with during a curtain walling job in Hythe?

You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.

Can you match the frames already on my Hythe building?

Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.

Does a shop sign in the Hythe area need advertisement consent?

Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.

Does a new shopfront in the Hythe area need Building Regulations approval?

Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.

Planning curtain walling in Hythe?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price