Replacing tired glazing on New Romney premises is often a chance to rethink the whole elevation. We survey the existing frame and fixings, then advise whether a new curtain wall or a more modest reglaze makes sense.
Please have keys to any meter cupboards and shutter housings to hand when we survey in New Romney, because what sits behind them can change the drawing.

What goes into getting curtain walling right in New Romney?
If your New Romney premises have a concrete frame, we open up a sample of slab edges at survey and plan brackets around what is really there. Steel frames and older masonry piers each need a different fixing, so nothing is priced from assumptions.
If the ground floor of your New Romney premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at New Romney premises, since a shutter box or old beam may set the limit.
How much could curtain walling in New Romney cost you?
As a working budget, use £550 to £1,250 plus VAT per m². Your place inside that range for curtain walling depends mostly on how much of the existing frontage can stay and how much has to be put right first.
Which applications might curtain walling in New Romney involve?
For curtain walling at premises in the New Romney area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Expect planning and advert applications here to go to Folkestone and Hythe District Council in the normal way. We check what that means for your building when we survey it in New Romney.
| Town | New Romney |
|---|---|
| Area | Kent |
| Postcode districts | TN28 |
| Planning authority | Folkestone and Hythe District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 163 miles |
| Survey | Free for new work |
Questions about curtain walling in New Romney
Who do I deal with during a curtain walling job in New Romney?
You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.
Can you match the frames already on my New Romney building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
Is curtain walling right for a single-storey unit in New Romney?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Do I need listed building consent for a shopfront in the New Romney area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Does the Equality Act apply to a shop entrance in the New Romney area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.