From Preston to the furthest corner of Lancashire, the sequence for aluminium shopfronts stays the same: survey, drawings, written price, then work on site. We travel from Great Barr in Birmingham and use vetted teams working under S&K Glazing.
If you're a tenant, your landlord will probably want to see what is proposed. The scale drawings we produce for aluminium shopfronts are clear enough to send straight on, which saves a round of explaining.

What should you settle before committing to aluminium shopfronts in Lancashire?
A unit in Preston may only be able to close overnight, while a shop on a quieter street might prefer a midweek closed day. We plan the strip-out around your takings, and the fitting sequence follows from that.
Large panes set the logistics for any aluminium front in Lancashire. We look at where a glass vehicle can stop, how far the panes must be carried and whether a lifting aid will fit, because a 3m sheet that can't reach the opening on the day is a wasted trip.
What consents apply to aluminium shopfronts in Lancashire?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for aluminium shopfronts at premises in the Lancashire area, an application is then likely. The council confirms which side of that line a job falls on.
How much do aluminium shopfronts cost in Lancashire?
A sensible starting budget is £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
| Area | Lancashire |
|---|---|
| Nation | England |
| Towns covered | 30 |
| Main town | Preston |
| Planning regime | England: TCPA 1990 and the 2007 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents) |
| Survey | Free for new work, from our Great Barr base |
Questions about aluminium shopfronts in Lancashire
Can premises in Preston be fitted outside trading hours?
Usually, yes. Closed-day or out-of-hours installation can be arranged, and the noisy strip-out is planned first so the rest of the work disturbs neighbours less.
How long would an aluminium shopfront take in Lancashire?
Typically 2 to 4 weeks to fabricate once drawings are signed off, then 1 to 5 days on site. The programme depends on the opening rather than the postcode, so it is set after the measured survey.
Can you match other units we run in Lancashire?
Yes, if we can see what is already there. We record the section, colour and stallriser detail from your existing front, then draw the new unit to sit with it.
Does the Equality Act apply to a shop entrance in the Lancashire area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.
Do I need planning permission to change a shopfront in the Lancashire area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.