Colour is where an aluminium front in Fleetwood earns its keep. We choose it against your actual brick, stone or render, then carry it through the frame, door, capping and fascia so the whole elevation reads as one.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Fleetwood, because what sits behind them can change the drawing.

How would we approach aluminium shopfronts for your Fleetwood premises?
If your Fleetwood frontage faces south or west, the colour choice has a physical effect. Dark frames run hot in full sun and long runs of aluminium move, so we'd leave room for expansion at the fascia and look at solar control glass to protect stock.
Some Fleetwood landlords issue a shopfront specification, and we'd draw to it from the start. Where your brand needs something different, we mark each departure on the drawing so the landlord can approve the front without a round of guesswork.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Fleetwood premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What should you budget for aluminium shopfronts in Fleetwood?
Allow £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Size and specification set most of that figure for aluminium shopfronts, and the rest depends on what the survey finds on site.
What consents could affect aluminium shopfronts in Fleetwood?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for aluminium shopfronts at premises in the Fleetwood area, an application is then likely. The council confirms which side of that line a job falls on.
Planning and advert applications for Fleetwood premises normally go to Wyre Borough Council. We check the position for your address at survey.
| Town | Fleetwood |
|---|---|
| Area | Lancashire |
| Postcode districts | FY5, FY7 |
| Planning authority | Wyre Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 105 miles |
| Survey | Free for new work |
Questions about aluminium shopfronts in Fleetwood
Can a sign and shutter be fitted with the frame in Fleetwood?
Yes, and it's usually the neater way to do it. One contract covers the frontage, so the shutter box, fascia and sign fixings are drawn together and nobody is left waiting for another trade.
Can you match a shopfront I like elsewhere in Lancashire?
Usually, yes. Send the photo and address, and we'll work out the section, colour and proportions behind it, then adapt them to your Fleetwood opening.
Will an aluminium front make my Fleetwood shop warmer?
It can, though the glass matters more than the frame. A thermally broken section with double-glazed units loses less heat than single glazing, and a well-sealed door is often the change you notice most on a cold day.
Do I need planning permission to change a shopfront in the Fleetwood area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.
Does a shop sign in the Fleetwood area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.