We make timber shopfronts for Fleetwood premises, from plain painted frames to full cornice and console fronts. Every one starts with a measured survey and scale drawings.
Measuring the opening is the easy part of a survey in Fleetwood. We also look at the beam above, the pavement fall and any meters or drains nearby.

How would we approach timber shopfronts for your Fleetwood premises?
A brand rollout can include timber, as long as the details repeat. For a branch in Fleetwood we'd use the same mouldings, colours and sign panel as your other sites, adjusting only the widths and heights to fit the opening.
A south or west-facing Fleetwood frontage is hard on paint. We'd steer you toward a lighter colour or a more stable timber, and if the brand needs a dark finish, we'd plan a shorter repaint interval from the outset.
If your Fleetwood unit sits in a Victorian parade, the old pilasters usually set the rhythm, so a new front should land on them and not run past them. Keep that line and even a modern frame looks as though it belongs.
What consents could affect timber shopfronts in Fleetwood?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Fleetwood area, an application is then likely. The council confirms which side of that line a job falls on.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Fleetwood premises normally go to Wyre Borough Council.
What should you budget for timber shopfronts in Fleetwood?
Until the survey is done, plan on £3,995 to £13,995 plus VAT for a typical frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
| Town | Fleetwood |
|---|---|
| Area | Lancashire |
| Postcode districts | FY5, FY7 |
| Planning authority | Wyre Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 105 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Fleetwood
Can you copy a timber shopfront I've seen in Lancashire?
We can work from your photo and borrow what makes it succeed, including proportions, moulding sizes and colour. The front is then drawn to your own Fleetwood opening.
How much disruption will a timber front cause in my Fleetwood shop?
Expect more time on site than an aluminium front, typically 3 to 7 days with the painting. Closed-day or out-of-hours fitting can be arranged, and the opening stays boarded and secure between stages.
Will timber suffer on my Fleetwood frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
Does a new shopfront in the Fleetwood area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
Does the Equality Act apply to a shop entrance in the Fleetwood area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.