We make timber shopfronts for Garstang premises, from plain painted frames to full cornice and console fronts. Every one starts with a measured survey and scale drawings.
We measure your Garstang opening in person, at a time agreed with you first, so the visit fits around your trading.

What goes into getting timber shopfronts right in Garstang?
In a parade of mixed fronts in Garstang, painted timber can lift a unit without shouting. We'd take the height of the neighbouring cills and fascias, then let the depth of the mouldings and a considered colour do the talking.
A corner plot gives a timber front two faces and one chance to get the turn right. For Garstang premises on a corner, we'd use a pilaster or a canted bay at the angle, so the cornice wraps round without a clumsy mitre.
If there are storeys above the shop, the frontage should feel like the base of the building and not a sign stuck on it. Lining up mullions with the windows overhead is a small move that settles the whole elevation at Garstang premises.
How much could timber shopfronts in Garstang cost you?
Allow £3,995 to £13,995 plus VAT for a typical frontage. Size and specification set most of that figure for timber shopfronts, and the rest depends on what the survey finds on site.
Which applications might timber shopfronts in Garstang involve?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Garstang area, an application is then likely. The council confirms which side of that line a job falls on.
For Garstang, the usual route for planning and advert applications is through Wyre Borough Council, and we confirm that when we visit.
| Town | Garstang |
|---|---|
| Area | Lancashire |
| Postcode districts | PR3 |
| Planning authority | Wyre Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 100 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Garstang
Can you fit a timber front around existing tiles in Garstang?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
Do you make the joinery for Garstang shops to order?
Yes. Every length is made to the signed-off drawings for your opening, then brought to Garstang from Great Barr by vetted teams working under S&K Glazing.
Can a timber front take a modern sign in Garstang?
Yes. Hand-painted letters suit a timber fascia well, and raised letters or a concealed trough light work too. We draw the sign and the joinery together, so the fixings don't cut through a moulding.
What rules apply to a fire exit door through a shopfront in the Garstang area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need listed building consent for a shopfront in the Garstang area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.