Want a new front for your Portland premises? An aluminium frame gives you slim sightlines and a hard-wearing finish in any RAL colour, proportioned to the building rather than picked from a range.
A survey in Portland usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

Where should you begin with aluminium shopfronts in Portland?
If your Portland frontage faces south or west, the colour choice has a physical effect. Dark frames run hot in full sun and long runs of aluminium move, so we'd leave room for expansion at the fascia and look at solar control glass to protect stock.
Some Portland landlords issue a shopfront specification, and we'd draw to it from the start. Where your brand needs something different, we mark each departure on the drawing so the landlord can approve the front without a round of guesswork.
A corner unit has two fronts to think about, and the return elevation often does as much selling as the main one. If that is your layout in Portland, carry the fascia and glass line round the corner and treat both faces as one composition.
What sign-off might you need for aluminium shopfronts in Portland?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for aluminium shopfronts at premises in the Portland area: a planning application, or work that doesn't materially affect the external appearance.
Planning and advert applications for Portland premises normally go to Dorset Council. We check the position for your address at survey.
What price should you expect for aluminium shopfronts in Portland?
Allow £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Size and specification set most of that figure for aluminium shopfronts, and the rest depends on what the survey finds on site.
| Town | Portland |
|---|---|
| Area | Dorset |
| Postcode districts | DT5 |
| Planning authority | Dorset Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 139 miles |
| Survey | Free for new work |
Questions about aluminium shopfronts in Portland
Will an aluminium front make my Portland shop warmer?
It can, though the glass matters more than the frame. A thermally broken section with double-glazed units loses less heat than single glazing, and a well-sealed door is often the change you notice most on a cold day.
What happens to my old shopfront in Portland?
We strip it out and take it away, and that work appears as its own line on the quotation. If part of the old front is worth keeping, such as a stallriser or decorative ironwork, say so at survey and we'll draw around it.
Can I keep trading while my Portland shopfront is replaced?
Often, yes. The front can usually be replaced a section at a time, with temporary screens keeping the shop secure, and a closed-day or out-of-hours fit can be arranged if that suits you better.
What rules apply to a fire exit door through a shopfront in the Portland area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do roller shutters need planning permission in the Portland area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.