Our quotation for aluminium shopfronts in Dorset is written, itemised and valid for 90 days. Nothing is ordered until you accept it, which gives you time to take it to a landlord, a partner or a board.
Your frontage is read alongside its neighbours, so we note the fascia line, stallriser height and pilasters on either side before drawing aluminium shopfronts for Dorset premises. Matching those lines or breaking them on purpose can both work, whereas doing it by accident never does.

What makes aluminium shopfronts work well for premises in Dorset?
If your premises in Dorset face the sea or a main road, the finish plan changes before the colour does. Salt and traffic film are harder on a coating, so we'd look at pre-treatment, fixings and a realistic cleaning routine from the first drawing.
Landlords with several units in Dorset get the most from aluminium by fixing a house detail. One section, one colour and one stallriser height, agreed once, make every later unit simpler to draw and keep the parade consistent as tenants change.
What consents apply to aluminium shopfronts in Dorset?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for aluminium shopfronts at premises in the Dorset area: a planning application, or work that doesn't materially affect the external appearance.
How much do aluminium shopfronts cost in Dorset?
Guide price: £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Materials, finish and the amount of drawing and coordination involved all move it, and your itemised quotation shows where the money goes on aluminium shopfronts.
| Area | Dorset |
|---|---|
| Nation | England |
| Towns covered | 16 |
| Main town | Bournemouth |
| Planning regime | England: TCPA 1990 and the 2007 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents) |
| Survey | Free for new work, from our Great Barr base |
Questions about aluminium shopfronts in Dorset
Can premises in Bournemouth be fitted outside trading hours?
Usually, yes. Closed-day or out-of-hours installation can be arranged, and the noisy strip-out is planned first so the rest of the work disturbs neighbours less.
Can you work with our shopfitter in Dorset?
Yes. We can supply the front as one package within a wider fit-out, working to the shopfitter's programme and agreeing the floor, ceiling and signage interfaces on the drawings.
Do you fit aluminium shopfronts across Dorset?
Yes. We travel from Great Barr to survey and fit across Dorset, using vetted teams working under S&K Glazing with one named contact for the job.
What rules apply to a fire exit door through a shopfront in the Dorset area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does the Equality Act apply to a shop entrance in the Dorset area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.