0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Aluminium shopfronts
  4. Queen's Park

Aluminium shopfronts in Queen's Park

Sightlines, proportion and finish worked out for your Queen's Park building.

Colour is where an aluminium front in Queen's Park earns its keep. We choose it against your actual brick, stone or render, then carry it through the frame, door, capping and fascia so the whole elevation reads as one.

Bring whatever you have to the survey in Queen's Park: brand guidelines, lease plans, old drawings or a photo of a frontage you admire.

Dark bronze aluminium shopfront with slim frames, a low stallriser and a glazed entrance door

What goes into getting aluminium shopfronts right in Queen's Park?

If your Queen's Park frontage faces south or west, the colour choice has a physical effect. Dark frames run hot in full sun and long runs of aluminium move, so we'd leave room for expansion at the fascia and look at solar control glass to protect stock.

Where a unit in Queen's Park can't afford a closed day, a night fit is worth pricing. Strip-out and frame go in over consecutive nights, with temporary boarding between shifts, so the shop opens each morning weathertight and secure.

Where the footway outside your Queen's Park premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.

Which applications might aluminium shopfronts in Queen's Park involve?

A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for aluminium shopfronts at premises in the Queen's Park area, an application is then likely. The council confirms which side of that line a job falls on.

At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to Westminster City Council.

How much could aluminium shopfronts in Queen's Park cost you?

Until the survey is done, plan on £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.

Queen's Park at a glance
TownQueen's Park
AreaGreater London
Postcode districtsNW6, W10, W11, W9
Planning authorityWestminster City Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 101 miles
SurveyFree for new work

Does Westminster City Council publish shopfront guidance?

Yes, Shopfronts, Blinds and Signs - A Guide to their Design (1993). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • Roller shutters will not normally be given consent, and internally fitted brick-bond grilles are the preferred solution.
  • Large internally lit box signs are generally inappropriate, while externally lit fascias and back-lit or halo-lit letters are accepted.
  • Projecting signs need at least 2.6m clearance above the pavement and should sit at fascia level, centred on a pilaster.

Read our summary of the Westminster guidance

Questions about aluminium shopfronts in Queen's Park

Can you match a shopfront I like elsewhere in Greater London?

Usually, yes. Send the photo and address, and we'll work out the section, colour and proportions behind it, then adapt them to your Queen's Park opening.

Who carries out the work in Queen's Park?

Vetted teams working under S&K Glazing carry it out, with one named contact from survey to handover. The contract is with S&K Glazing Limited, and we travel to Queen's Park from Great Barr.

How does pricing work for Queen's Park premises?

Every price comes from a measure-up, never a photograph. You get an itemised written quotation that holds for 90 days, and nothing is ordered until you accept it.

Does the Equality Act apply to a shop entrance in the Queen's Park area?

Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.

Do I need listed building consent for a shopfront in the Queen's Park area?

Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.

Planning aluminium shopfronts in Queen's Park?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price