A good aluminium shopfront in Reigate should look as if it grew out of the building above it. We set the stallriser, mullions and fascia from the proportions of your elevation, across Reigate and the rest of Surrey.
We measure your Reigate opening in person, at a time agreed with you first, so the visit fits around your trading.

What should you think about before commissioning aluminium shopfronts in Reigate?
If your Reigate branch is one stop in a wider rollout, we'd adapt your standard details to this opening instead of forcing the opening to fit them. Section, colour and fixings stay the same as the rest of the estate, while mullion spacing and fascia depth answer to the building.
A narrow Reigate unit gains from fewer parts. Under about 4m wide, we'd offset the door and use one large pane rather than a central door with two slivers of glass either side, which makes the front feel wider than it measures.
If there are storeys above the shop, the frontage should feel like the base of the building and not a sign stuck on it. Lining up mullions with the windows overhead is a small move that settles the whole elevation at Reigate premises.
Who approves aluminium shopfronts in Reigate?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for aluminium shopfronts at premises in the Reigate area, an application is then likely. The council confirms which side of that line a job falls on.
For Reigate, the usual route for planning and advert applications is through Reigate and Banstead Borough Council, and we confirm that when we visit.
What is a realistic budget for aluminium shopfronts in Reigate?
Allow £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Size and specification set most of that figure for aluminium shopfronts, and the rest depends on what the survey finds on site.
| Town | Reigate |
|---|---|
| Area | Surrey |
| Postcode districts | KT20, RH1, RH2, RH3 |
| Planning authority | Reigate and Banstead Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 116 miles |
| Survey | Free for new work |
Questions about aluminium shopfronts in Reigate
Can a sign and shutter be fitted with the frame in Reigate?
Yes, and it's usually the neater way to do it. One contract covers the frontage, so the shutter box, fascia and sign fixings are drawn together and nobody is left waiting for another trade.
Who carries out the work in Reigate?
Vetted teams working under S&K Glazing carry it out, with one named contact from survey to handover. The contract is with S&K Glazing Limited, and we travel to Reigate from Great Barr.
Can you match a shopfront I like elsewhere in Surrey?
Usually, yes. Send the photo and address, and we'll work out the section, colour and proportions behind it, then adapt them to your Reigate opening.
What rules apply to a fire exit door through a shopfront in the Reigate area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need planning permission to change a shopfront in the Reigate area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.