Underneath a later fascia on your Reigate premises, there may be more of the old front than you think. Our survey looks for the brackets, cornices and ghost lines that show how it once looked.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Reigate, because what sits behind them can change the drawing.

What makes heritage shopfronts work well on Reigate premises?
A landlord may own the building while you hold the lease, and each can see old fabric differently. For Reigate premises we'd prepare a plain record of what's there and what we propose, so both sides can agree before work starts.
A narrow period front relies on fine detail. For a slim Reigate unit we'd keep the bars thin and the mouldings small, because anything oversized on a small front looks like a later addition.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Reigate premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
How much should you set aside for heritage shopfronts in Reigate?
As a working budget, use £8,495 to £24,995 plus VAT for a typical frontage. Your place inside that range for heritage shopfronts depends mostly on how much of the existing frontage can stay and how much has to be put right first.
Could heritage shopfronts in Reigate need planning permission?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for heritage shopfronts at premises in the Reigate area: a planning application, or work that doesn't materially affect the external appearance.
Planning and advert applications for Reigate premises normally go to Reigate and Banstead Borough Council. We check the position for your address at survey.
| Town | Reigate |
|---|---|
| Area | Surrey |
| Postcode districts | KT20, RH1, RH2, RH3 |
| Planning authority | Reigate and Banstead Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 116 miles |
| Survey | Free for new work |
Questions about heritage shopfronts in Reigate
Which old features would you always try to save in Surrey?
Tiled stallrisers, mosaic thresholds, console brackets, ironwork and leaded top lights, wherever they survive. These are the details that are hardest to recreate convincingly.
What does a period survey of my Reigate shop involve?
We measure the front, photograph every detail and check the condition of timber, paint and glass. With your agreement, we may lift a small piece of later boarding to see what survives behind it.
How long will restoration take at my Reigate premises?
New joinery typically takes 8 to 14 weeks to make, then 1 to 3 weeks on site. The survey gives you a realistic programme, because repair-only jobs can take far less.
Do roller shutters need planning permission in the Reigate area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
What rules apply to a fire exit door through a shopfront in the Reigate area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.