A good aluminium shopfront in Sandy should look as if it grew out of the building above it. We set the stallriser, mullions and fascia from the proportions of your elevation, across Sandy and the rest of Bedfordshire.
Bring whatever you have to the survey in Sandy: brand guidelines, lease plans, old drawings or a photo of a frontage you admire.

What goes into getting aluminium shopfronts right in Sandy?
Some Sandy landlords issue a shopfront specification, and we'd draw to it from the start. Where your brand needs something different, we mark each departure on the drawing so the landlord can approve the front without a round of guesswork.
Where Sandy premises have a deep recessed entrance, it's usually worth keeping. The angled returns add display length and shelter, and a slim frame with soffit lighting turns a dark corner into the brightest part of the front in the evening.
Where the footway outside your Sandy premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.
Which applications might aluminium shopfronts in Sandy involve?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for aluminium shopfronts at premises in the Sandy area, an application is then likely. The council confirms which side of that line a job falls on.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Sandy premises normally go to Central Bedfordshire Council.
How much could aluminium shopfronts in Sandy cost you?
Our guide band is £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Scope is the biggest lever, so a tighter brief for aluminium shopfronts brings the figure down faster than any change of detail.
| Town | Sandy |
|---|---|
| Area | Bedfordshire |
| Postcode districts | SG18, SG19 |
| Planning authority | Central Bedfordshire Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 74 miles |
| Survey | Free for new work |
Questions about aluminium shopfronts in Sandy
Can you match a shopfront I like elsewhere in Bedfordshire?
Usually, yes. Send the photo and address, and we'll work out the section, colour and proportions behind it, then adapt them to your Sandy opening.
Can a sign and shutter be fitted with the frame in Sandy?
Yes, and it's usually the neater way to do it. One contract covers the frontage, so the shutter box, fascia and sign fixings are drawn together and nobody is left waiting for another trade.
Will an aluminium front make my Sandy shop warmer?
It can, though the glass matters more than the frame. A thermally broken section with double-glazed units loses less heat than single glazing, and a well-sealed door is often the change you notice most on a cold day.
Do I need planning permission to change a shopfront in the Sandy area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.
What rules apply to a fire exit door through a shopfront in the Sandy area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.