Colour is where an aluminium front in Tonyrefail earns its keep. We choose it against your actual brick, stone or render, then carry it through the frame, door, capping and fascia so the whole elevation reads as one.
A survey in Tonyrefail usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

How would we approach aluminium shopfronts for your Tonyrefail premises?
Where a unit in Tonyrefail can't afford a closed day, a night fit is worth pricing. Strip-out and frame go in over consecutive nights, with temporary boarding between shifts, so the shop opens each morning weathertight and secure.
A narrow Tonyrefail unit gains from fewer parts. Under about 4m wide, we'd offset the door and use one large pane rather than a central door with two slivers of glass either side, which makes the front feel wider than it measures.
If your Tonyrefail unit is narrow, a central door can split a small window into two weak ones. Moving the door to one side gives you a single confident pane, provided the layout inside still works.
What consents could affect aluminium shopfronts in Tonyrefail?
Going by Part 42 of the 1995 Order as inserted in 2014, Wales has no permitted development route for changing a shopfront. The right covers A1 and A2 premises, but it excludes creating, altering or replacing a shopfront, or fitting or replacing a security grill or shutter on one, and it doesn't apply on Article 1(5) land. For aluminium shopfronts at premises in the Tonyrefail area, that leaves a planning application, or work that leaves the appearance materially unchanged.
Planning and advert applications for Tonyrefail premises normally go to Rhondda Cynon Taf County Borough Council. We check the position for your address at survey.
What should you budget for aluminium shopfronts in Tonyrefail?
A sensible starting budget is £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
| Town | Tonyrefail |
|---|---|
| Area | Mid Glamorgan |
| Postcode districts | CF39, CF40, CF72 |
| Planning authority | Rhondda Cynon Taf County Borough Council |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 93 miles |
| Survey | Free for new work |
Does Rhondda Cynon Taf County Borough Council publish shopfront guidance?
Yes, Shopfront Design. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- External roller shutters are a last resort after other security options are shown to be unsuitable.
- Solid metal shutters are unlikely to be acceptable, while lattice or brick-bond grille shutters may be considered.
- Individual shutters covering only the glazing are one option, and powder coating is generally preferred to paint.
Questions about aluminium shopfronts in Tonyrefail
What happens to my old shopfront in Tonyrefail?
We strip it out and take it away, and that work appears as its own line on the quotation. If part of the old front is worth keeping, such as a stallriser or decorative ironwork, say so at survey and we'll draw around it.
Will an aluminium front make my Tonyrefail shop warmer?
It can, though the glass matters more than the frame. A thermally broken section with double-glazed units loses less heat than single glazing, and a well-sealed door is often the change you notice most on a cold day.
Can you match a shopfront I like elsewhere in Mid Glamorgan?
Usually, yes. Send the photo and address, and we'll work out the section, colour and proportions behind it, then adapt them to your Tonyrefail opening.
Can a shop fire exit in the Tonyrefail area use a sliding door?
No, a dedicated fire exit can't be a sliding or revolving door. In Wales, article 14(2) of the Regulatory Reform (Fire Safety) Order 2005 also says fire exit doors must open in the direction of escape and can't be locked against immediate use. The responsible person holds that duty, normally the employer or whoever controls the premises for a business, otherwise the owner.
Does a replacement shopfront in the Tonyrefail area need Building Regulations approval?
Assume yes until building control says otherwise, because Wales has no like-for-like exemption. Glazing is judged against Approved Document N, as Wales keeps Part N. A registered installer can self-certify replacement windows and doors in non-dwellings, but not structural glass, curtain walling or revolving doors.