Each frameless door for Tonyrefail premises is made to a final check measure, never to a rough size. We travel from Great Barr to fit it, and you'll have one named contact from start to finish.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

What makes frameless glass doors work well on Tonyrefail premises?
In a parade in Tonyrefail, a frameless door can sit within a framed front without looking out of place. We'd match its head height to the neighbouring transoms and keep the fittings in the frame colour.
A frameless door can often be swapped overnight at Tonyrefail premises that can't close. We'd complete the check measure in advance, take the old door off after trading and hang the new one before you open.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Tonyrefail premises, since a shutter box or old beam may set the limit.
Could frameless glass doors in Tonyrefail need planning permission?
Like-for-like replacement usually needs no planning permission in Wales, because the external appearance isn't materially affected. Matching the existing materials, proportions and glass line is what keeps a job in that position. For frameless glass doors at premises in the Tonyrefail area, changing any of those usually means an application, which the council can confirm.
For Tonyrefail, the usual route for planning and advert applications is through Rhondda Cynon Taf County Borough Council, and we confirm that when we visit.
How much should you set aside for frameless glass doors in Tonyrefail?
A sensible starting budget is £1,495 to £4,495 plus VAT per door set. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
| Town | Tonyrefail |
|---|---|
| Area | Mid Glamorgan |
| Postcode districts | CF39, CF40, CF72 |
| Planning authority | Rhondda Cynon Taf County Borough Council |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 93 miles |
| Survey | Free for new work |
Does Rhondda Cynon Taf County Borough Council publish shopfront guidance?
Yes, Shopfront Design. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- External roller shutters are a last resort after other security options are shown to be unsuitable.
- Solid metal shutters are unlikely to be acceptable, while lattice or brick-bond grille shutters may be considered.
- Individual shutters covering only the glazing are one option, and powder coating is generally preferred to paint.
Questions about frameless glass doors in Tonyrefail
Can you reuse my existing floor spring in Tonyrefail?
Sometimes, if it is sound and suits the new leaf. We'd test it at survey, because an old spring under a heavier door tends to fail early.
How long will my Tonyrefail entrance be out of use?
Usually only a few hours, if the floor needs no work. Doors are often fitted outside trading hours, so you can open as normal.
Can my Tonyrefail premises take a frameless glass door?
Most can, once the floor and opening have been checked. The survey shows whether a floor spring will fit, and if not, a concealed closer in a transom does the same job.
Can a shop fire exit in the Tonyrefail area use a sliding door?
No, a dedicated fire exit can't be a sliding or revolving door. In Wales, article 14(2) of the Regulatory Reform (Fire Safety) Order 2005 also says fire exit doors must open in the direction of escape and can't be locked against immediate use. The responsible person holds that duty, normally the employer or whoever controls the premises for a business, otherwise the owner.
Does a replacement shopfront in the Tonyrefail area need Building Regulations approval?
Assume yes until building control says otherwise, because Wales has no like-for-like exemption. Glazing is judged against Approved Document N, as Wales keeps Part N. A registered installer can self-certify replacement windows and doors in non-dwellings, but not structural glass, curtain walling or revolving doors.