If your Tredegar unit needs a sharper face on the street, aluminium is usually the simplest route. Fabrication typically takes 2 to 4 weeks and fitting 1 to 5 days, arranged around your trading hours where needed.
Your survey is where the price gets real, because widths, heights, levels and access are all taken on site in Tredegar.

What makes aluminium shopfronts work well on Tredegar premises?
Where Tredegar premises have a deep recessed entrance, it's usually worth keeping. The angled returns add display length and shelter, and a slim frame with soffit lighting turns a dark corner into the brightest part of the front in the evening.
A narrow Tredegar unit gains from fewer parts. Under about 4m wide, we'd offset the door and use one large pane rather than a central door with two slivers of glass either side, which makes the front feel wider than it measures.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Tredegar premises on a slope look settled once that line is true.
How much should you set aside for aluminium shopfronts in Tredegar?
The guide for aluminium shopfronts is £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
Could aluminium shopfronts in Tredegar need planning permission?
Section 55 of the Town and Country Planning Act 1990 sets the test in Wales: work that doesn't materially affect the external appearance isn't development. Anything that does needs planning permission, and that goes for aluminium shopfronts at premises in the Tredegar area as much as for a full new frontage. The council confirms how the test applies to your site.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Tredegar premises normally go to Blaenau Gwent County Borough Council.
| Town | Tredegar |
|---|---|
| Area | Gwent |
| Postcode districts | NP22 |
| Planning authority | Blaenau Gwent County Borough Council |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 78 miles |
| Survey | Free for new work |
Does Blaenau Gwent County Borough Council publish shopfront guidance?
Yes, Shopfronts and Advertisements Supplementary Planning Guidance (2015). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Solid metal shutters are not acceptable, while lattice or brick-bond grilles with housing hidden behind the fascia are more likely to be accepted.
- Shutter housing must be at least 2.1m above ground, and locks and guides must not encroach on the highway.
- Reinstating a stallriser is desirable where one has previously been removed.
Questions about aluminium shopfronts in Tredegar
Who carries out the work in Tredegar?
Vetted teams working under S&K Glazing carry it out, with one named contact from survey to handover. The contract is with S&K Glazing Limited, and we travel to Tredegar from Great Barr.
What happens to my old shopfront in Tredegar?
We strip it out and take it away, and that work appears as its own line on the quotation. If part of the old front is worth keeping, such as a stallriser or decorative ironwork, say so at survey and we'll draw around it.
How does pricing work for Tredegar premises?
Every price comes from a measure-up, never a photograph. You get an itemised written quotation that holds for 90 days, and nothing is ordered until you accept it.
Can a roller shutter go on a shop in the Tredegar area without planning permission?
Usually not in Wales. Part 42 of the 1995 Order, as inserted in 2014, excludes installing or replacing a security grill or shutter on a shopfront, so the rights for shops don't help. The only way to avoid an application is work that doesn't materially affect the appearance, and the council confirms that.
Can a shop fire exit in the Tredegar area use a sliding door?
No, a dedicated fire exit can't be a sliding or revolving door. In Wales, article 14(2) of the Regulatory Reform (Fire Safety) Order 2005 also says fire exit doors must open in the direction of escape and can't be locked against immediate use. The responsible person holds that duty, normally the employer or whoever controls the premises for a business, otherwise the owner.