One contract covers the frontage when you come to us for aluminium shopfronts in Gwent, so glass, frame, sign and shutter aren't separate trades to chase. You also keep one named contact from first visit to handover.
If you're a tenant, your landlord will probably want to see what is proposed. The scale drawings we produce for aluminium shopfronts are clear enough to send straight on, which saves a round of explaining.

Where do you start with aluminium shopfronts in Gwent?
Landlords with several units in Gwent get the most from aluminium by fixing a house detail. One section, one colour and one stallriser height, agreed once, make every later unit simpler to draw and keep the parade consistent as tenants change.
Across Gwent, the same aluminium section can look sharp or wrong depending on what stands around it. We choose colour on site against the real brick, stone or render at your address, because a RAL chip under office lights tells you very little.
What consents apply to aluminium shopfronts in Gwent?
Like-for-like replacement usually needs no planning permission in Wales, because the external appearance isn't materially affected. Matching the existing materials, proportions and glass line is what keeps a job in that position. For aluminium shopfronts at premises in the Gwent area, changing any of those usually means an application, which the council can confirm.
How much do aluminium shopfronts cost in Gwent?
Our guide band is £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Scope is the biggest lever, so a tighter brief for aluminium shopfronts brings the figure down faster than any change of detail.
| Area | Gwent |
|---|---|
| Nation | Wales |
| Towns covered | 17 |
| Main town | Newport |
| Planning regime | Wales: TCPA 1990 and the 1992 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Survey | Free for new work, from our Great Barr base |
Does Blaenau Gwent County Borough Council publish shopfront guidance?
Yes, Shopfronts and Advertisements Supplementary Planning Guidance (2015). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Solid metal shutters are not acceptable, while lattice or brick-bond grilles with housing hidden behind the fascia are more likely to be accepted.
- Shutter housing must be at least 2.1m above ground, and locks and guides must not encroach on the highway.
- Reinstating a stallriser is desirable where one has previously been removed.
Questions about aluminium shopfronts in Gwent
Can you match other units we run in Gwent?
Yes, if we can see what is already there. We record the section, colour and stallriser detail from your existing front, then draw the new unit to sit with it.
Do you fit aluminium shopfronts across Gwent?
Yes. We travel from Great Barr to survey and fit across Gwent, using vetted teams working under S&K Glazing with one named contact for the job.
How long would an aluminium shopfront take in Gwent?
Typically 2 to 4 weeks to fabricate once drawings are signed off, then 1 to 5 days on site. The programme depends on the opening rather than the postcode, so it is set after the measured survey.
Can a shop fire exit in the Gwent area use a sliding door?
No, a dedicated fire exit can't be a sliding or revolving door. In Wales, article 14(2) of the Regulatory Reform (Fire Safety) Order 2005 also says fire exit doors must open in the direction of escape and can't be locked against immediate use. The responsible person holds that duty, normally the employer or whoever controls the premises for a business, otherwise the owner.
Can a roller shutter go on a shop in the Gwent area without planning permission?
Usually not in Wales. Part 42 of the 1995 Order, as inserted in 2014, excludes installing or replacing a security grill or shutter on a shopfront, so the rights for shops don't help. The only way to avoid an application is work that doesn't materially affect the appearance, and the council confirms that.