For an entrance in Attleborough that stays busy all day, the sensor set-up matters as much as the door. Done well, it opens for customers and ignores people walking past, which keeps the heat in the shop.
Bring whatever you have to the survey in Attleborough: brand guidelines, lease plans, old drawings or a photo of a frontage you admire.

What goes into getting automatic sliding doors right in Attleborough?
A corner unit in Attleborough can often move its entrance to the angle, where two directions of footfall meet. We'd look at a curved or canted door set, and check the wind on both streets before fixing the position.
In a parade in Attleborough with a narrow pavement, the sensor set-up is the first job. We'd angle the radar so people walking past don't trigger the door, and keep the leaves in line with the neighbouring frontage.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Attleborough premises on a slope look settled once that line is true.
Which applications might automatic sliding doors in Attleborough involve?
For automatic sliding doors at premises in the Attleborough area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Attleborough premises normally go to Nuneaton and Bedworth Borough Council.
How much could automatic sliding doors in Attleborough cost you?
Until the survey is done, plan on £3,895 to £11,995 plus VAT per entrance. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
| Town | Attleborough |
|---|---|
| Area | Warwickshire |
| Postcode districts | CV10, CV11, CV12 |
| Planning authority | Nuneaton and Bedworth Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 19 miles |
| Survey | Free for new work |
Questions about automatic sliding doors in Attleborough
Who installs automatic doors in Attleborough?
Vetted door teams working under S&K Glazing handle the fit and set-up, travelling from Great Barr. Your agreement is with S&K Glazing Limited, and one person stays your point of call.
Can you match the door to my existing front in Warwickshire?
Yes. Frames come in any RAL colour, and we'd line up the leaves with your existing mullions so the door doesn't look like an add-on.
Will the door keep opening for passers-by in Attleborough?
Not if it is set up properly. We narrow the sensor field on site and test it against real footfall, so only people heading for the door trigger it.
Does a shop sign in the Attleborough area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.
Does the Equality Act apply to a shop entrance in the Attleborough area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.