Want a clearer view into your Attleborough shop? A toughened glass door on a floor spring gives you that, with slim fittings and a soft, controlled close.
Measuring the opening is the easy part of a survey in Attleborough. We also look at the beam above, the pavement fall and any meters or drains nearby.

What makes frameless glass doors work well on Attleborough premises?
In a deep recess, a frameless door gets natural shelter and can sit back from the street. At Attleborough premises with that layout, we'd choose glass side returns so the recess stays bright and the door stays obvious.
A narrow Attleborough unit benefits from a door that takes up no visual width. We'd use a single glass leaf hung beside one clear pane, so the entrance and the display read as one view into the shop.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Attleborough premises, since a shutter box or old beam may set the limit.
Could frameless glass doors in Attleborough need planning permission?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for frameless glass doors at premises in the Attleborough area: a planning application, or work that doesn't materially affect the external appearance.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to Nuneaton and Bedworth Borough Council.
How much should you set aside for frameless glass doors in Attleborough?
Our guide band is £1,495 to £4,495 plus VAT per door set. Scope is the biggest lever, so a tighter brief for frameless glass doors brings the figure down faster than any change of detail.
| Town | Attleborough |
|---|---|
| Area | Warwickshire |
| Postcode districts | CV10, CV11, CV12 |
| Planning authority | Nuneaton and Bedworth Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 19 miles |
| Survey | Free for new work |
Questions about frameless glass doors in Attleborough
How long will my Attleborough entrance be out of use?
Usually only a few hours, if the floor needs no work. Doors are often fitted outside trading hours, so you can open as normal.
Can my Attleborough premises take a frameless glass door?
Most can, once the floor and opening have been checked. The survey shows whether a floor spring will fit, and if not, a concealed closer in a transom does the same job.
Can I have my logo on a glass door in Attleborough?
Yes. Etched, frosted or printed logos work well, and they can double as the marking that stops people walking into the glass.
What rules apply to a fire exit door through a shopfront in the Attleborough area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do roller shutters need planning permission in the Attleborough area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.