A slim framed slider can sit inside an existing Burnham-on-Sea frontage with little change to the outside. The drive hides behind the fascia, and the leaves line up with the screens either side.
It helps if you can be there when we visit Burnham-on-Sea, since five minutes walking the frontage together answers more than a long email.

How do you design around the building when planning automatic sliding doors in Burnham-on-Sea?
In a parade in Burnham-on-Sea with a narrow pavement, the sensor set-up is the first job. We'd angle the radar so people walking past don't trigger the door, and keep the leaves in line with the neighbouring frontage.
A deep recess is a gift for an automatic door. At Burnham-on-Sea premises with one, we'd set the door back from the street so the sensors see less of the pavement and the leaves get some shelter from the wind.
Where the footway outside your Burnham-on-Sea premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.
What permissions should you check for automatic sliding doors in Burnham-on-Sea?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for automatic sliding doors at premises in the Burnham-on-Sea area: a planning application, or work that doesn't materially affect the external appearance.
Expect planning and advert applications here to go to Somerset Council in the normal way. We check what that means for your building when we survey it in Burnham-on-Sea.
What might automatic sliding doors cost in Burnham-on-Sea?
A sensible starting budget is £3,895 to £11,995 plus VAT per entrance. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
| Town | Burnham-on-Sea |
|---|---|
| Area | Somerset |
| Postcode districts | TA8 |
| Planning authority | Somerset Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 102 miles |
| Survey | Free for new work |
Questions about automatic sliding doors in Burnham-on-Sea
Who installs automatic doors in Burnham-on-Sea?
Vetted door teams working under S&K Glazing handle the fit and set-up, travelling from Great Barr. Your agreement is with S&K Glazing Limited, and one person stays your point of call.
Will an automatic door fit my Burnham-on-Sea shop?
It depends on the width of the front and the depth at the head. A survey shows whether the parked leaves fit and where the operator can hide, and if a slider won't work we'd look at a powered swing door.
What do I need to arrange for a door in Burnham-on-Sea?
Usually just a power supply near the head, and we'll tell you exactly what at survey. We can bring that into the one contract if you'd rather not chase an electrician.
What rules apply to a fire exit door through a shopfront in the Burnham-on-Sea area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need listed building consent for a shopfront in the Burnham-on-Sea area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.