We make timber shopfronts for Burnham-on-Sea premises, from plain painted frames to full cornice and console fronts. Every one starts with a measured survey and scale drawings.
Nothing gets ordered off the back of a survey in Burnham-on-Sea, because its job is to give us the numbers to draw and price from.

What goes into getting timber shopfronts right in Burnham-on-Sea?
A south or west-facing Burnham-on-Sea frontage is hard on paint. We'd steer you toward a lighter colour or a more stable timber, and if the brand needs a dark finish, we'd plan a shorter repaint interval from the outset.
Timber fits a night programme better than you'd think, since most of the joinery is made elsewhere. For a unit in Burnham-on-Sea that can't close by day, we'd fit the frame in stages at night and leave painting until the end, once the dust has gone.
If your Burnham-on-Sea unit sits in a Victorian parade, the old pilasters usually set the rhythm, so a new front should land on them and not run past them. Keep that line and even a modern frame looks as though it belongs.
Which applications might timber shopfronts in Burnham-on-Sea involve?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Burnham-on-Sea area, an application is then likely. The council confirms which side of that line a job falls on.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to Somerset Council.
How much could timber shopfronts in Burnham-on-Sea cost you?
Until the survey is done, plan on £3,995 to £13,995 plus VAT for a typical frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
| Town | Burnham-on-Sea |
|---|---|
| Area | Somerset |
| Postcode districts | TA8 |
| Planning authority | Somerset Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 102 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Burnham-on-Sea
Do you make the joinery for Burnham-on-Sea shops to order?
Yes. Every length is made to the signed-off drawings for your opening, then brought to Burnham-on-Sea from Great Barr by vetted teams working under S&K Glazing.
Can you copy a timber shopfront I've seen in Somerset?
We can work from your photo and borrow what makes it succeed, including proportions, moulding sizes and colour. The front is then drawn to your own Burnham-on-Sea opening.
How much disruption will a timber front cause in my Burnham-on-Sea shop?
Expect more time on site than an aluminium front, typically 3 to 7 days with the painting. Closed-day or out-of-hours fitting can be arranged, and the opening stays boarded and secure between stages.
Do I need listed building consent for a shopfront in the Burnham-on-Sea area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
What rules apply to a fire exit door through a shopfront in the Burnham-on-Sea area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.